EN 1652 Grade CuNi30Mn1Fe H110

View suppliers (4)
Want to keep this datasheet? Save it now in your required format


CuNi30Mn1Fe (CW354H) is comparable to CuNi30Mn1Fe, mat. no. 2.0882, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi30Mn1Fe is resistant to water and seawater, coolant and solvent, alkaline substances, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: good machinability: moderately hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, in petroleum processing an in chemical factories as well as in saltern plants. The material is established for condenser in ammoniac steam.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





20.0 °C

8.9 g/cm³

Show Material materials with Density of 8.9 g/cm³



Elastic modulus

20.0 °C

150 GPa

Show Material materials with Elastic modulus of 150 GPa

Hardness, Brinell

20.0 °C

110 [-]

Show Material materials with Hardness, Brinell of 110 [-]

Hardness, Vickers

20.0 °C

110 - 115 [-]

Show Material materials with Hardness, Vickers of 110 - 115 [-]



Coefficient of thermal expansion

300.0 °C

1.6E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.6E-5 1/K

Melting point

915 - 1240 °C

Show Material materials with Melting point of 915 - 1240 °C

Typical for Wrought Copper Nickel Grade

Specific heat capacity

23.0 °C

375 - 398 J/(kg·K)

Show Material materials with Specific heat capacity of 375 - 398 J/(kg·K)

Typical for Wrought Copper Nickel Grade

Thermal conductivity

20.0 °C

29 W/(m·K)

Show Material materials with Thermal conductivity of 29 W/(m·K)

Chemical properties



0.05 %

Show Material materials with Carbon of 0.05 %


0.1 %

Show Material materials with Cobalt of 0.1 %


0.4 - 1 %

Show Material materials with Iron of 0.4 - 1 %


0.02 %

Show Material materials with Lead of 0.02 %


0.5 - 1.5 %

Show Material materials with Manganese of 0.5 - 1.5 %


30 - 32 %

Show Material materials with Nickel of 30 - 32 %


0.02 %

Show Material materials with Phosphorus of 0.02 %


0.05 %

Show Material materials with Sulfur of 0.05 %


0.05 %

Show Material materials with Tin of 0.05 %


0.5 %

Show Material materials with Zinc of 0.5 %