EN 12163 Grade Cu-FRTP R230

View suppliers (1)
Want to keep this datasheet? Save it now in your required format


Material Cu-FRTP, mat. No CW006A, is an oxygenous copper-sort of min. 99,90% Cu. It is incomparable to any DIN-mark and it is applicated in the form of plates, sheets, bands, stripes and circular blanks as well as in the form of bars.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





20.0 °C

8.9 g/cm³

Show Material materials with Density of 8.9 g/cm³



Elastic modulus

23.0 °C

95 - 98 GPa

Show Material materials with Elastic modulus of 95 - 98 GPa

Typical for Wrought Copper Pure / Low Alloyed Copper


20.0 °C

18 %

Show Material materials with Elongation of 18 %

Poisson's ratio

23.0 °C

0.34 [-]

Show Material materials with Poisson's ratio of 0.34 [-]

Typical for Wrought Copper Pure / Low Alloyed Copper

Shear modulus

23.0 °C

48 GPa

Show Material materials with Shear modulus of 48 GPa

Typical for Wrought Copper Pure / Low Alloyed Copper

Tensile strength

20.0 °C

230 MPa

Show Material materials with Tensile strength of 230 MPa

Yield strength Rp0.2

20.0 °C

190 MPa

Show Material materials with Yield strength Rp0.2 of 190 MPa



Coefficient of thermal expansion

23.0 °C

1.6E-5 - 1.8E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.6E-5 - 1.8E-5 1/K

Typical for Wrought Copper Pure / Low Alloyed Copper

Melting point

965 - 1100 °C

Show Material materials with Melting point of 965 - 1100 °C

Typical for Wrought Copper Pure / Low Alloyed Copper

Specific heat capacity

23.0 °C

377 - 420 J/(kg·K)

Show Material materials with Specific heat capacity of 377 - 420 J/(kg·K)

Typical for Wrought Copper Pure / Low Alloyed Copper

Chemical properties



99.9 %

Show Material materials with Copper of 99.9 %


0.1 %

Show Material materials with Oxygen of 0.1 %

Do you have a technical question or need more information about this material?

Post it as a comment below and receive answers from engineers and other community members.