EN 12163 Grade CuNi1P TB00

Want to keep this datasheet? Save it now in your required format

Description

The material CuNi1P, mat. No CW108C is incomparable to a DIN-make. It is used in the form of bars.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8.92 g/cm³

Show Material materials with Density of 8.92 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

110 - 130 GPa

Show Material materials with Elastic modulus of 110 - 130 GPa

Typical for Wrought Copper High Copper Alloy

Elongation

20.0 °C

25 %

Show Material materials with Elongation of 25 %

Elongation A10

20.0 °C

22 %

Show Material materials with Elongation A10 of 22 %

Elongation A100

20.0 °C

20 %

Show Material materials with Elongation A100 of 20 %

Hardness, Brinell

20.0 °C

65 - 95 [-]

Show Material materials with Hardness, Brinell of 65 - 95 [-]

Hardness, Vickers

20.0 °C

70 - 100 [-]

Show Material materials with Hardness, Vickers of 70 - 100 [-]

Tensile strength

20.0 °C

250 MPa

Show Material materials with Tensile strength of 250 MPa

Yield strength Rp0.2

20.0 °C

140 MPa

Show Material materials with Yield strength Rp0.2 of 140 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

300.0 °C

1.77E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.77E-5 1/K

Melting point

855 - 1090 °C

Show Material materials with Melting point of 855 - 1090 °C

Typical for Wrought Copper High Copper Alloy

Specific heat capacity

20.0 °C

385 J/(kg·K)

Show Material materials with Specific heat capacity of 385 J/(kg·K)

Chemical properties

PropertyValue

Nickel

0.8 - 1.2 %

Show Material materials with Nickel of 0.8 - 1.2 %

Phosphorus

0.15 - 0.25 %

Show Material materials with Phosphorus of 0.15 - 0.25 %