EN 12167 Grade CuNi2Be H055

Want to keep this datasheet? Save it now in your required format


CuNi2Be, mat. No CW110C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuNi2Be, mat. No 2.0850, acc. to DIN 17666 : 1983-12 applies: The alloy shows high tensile strength and high temperature resistance and mean electrical and favorable thermal conductivity. Processing properties: hot and cold forming: good machinability: moderately hard and soft soldering: good gas shielded welding: good burnishing: good Application: For resistance welding electrodes as well as for springs. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts




Elastic modulus

23.0 °C

110 - 130 GPa

Show Material materials with Elastic modulus of 110 - 130 GPa

Typical for Wrought Copper High Copper Alloy

Hardness, Brinell

20.0 °C

55 [-]

Show Material materials with Hardness, Brinell of 55 [-]

Hardness, Vickers

20.0 °C

60 [-]

Show Material materials with Hardness, Vickers of 60 [-]



Coefficient of thermal expansion

23.0 °C

1.6E-5 - 1.8E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.6E-5 - 1.8E-5 1/K

Typical for Wrought Copper High Copper Alloy

Melting point

855 - 1090 °C

Show Material materials with Melting point of 855 - 1090 °C

Typical for Wrought Copper High Copper Alloy

Specific heat capacity

23.0 °C

360 - 420 J/(kg·K)

Show Material materials with Specific heat capacity of 360 - 420 J/(kg·K)

Typical for Wrought Copper High Copper Alloy

Chemical properties



0.2 - 0.6 %

Show Material materials with Beryllium of 0.2 - 0.6 %


0.3 %

Show Material materials with Cobalt of 0.3 %


0.2 %

Show Material materials with Iron of 0.2 %


1.4 - 2.4 %

Show Material materials with Nickel of 1.4 - 2.4 %