General
Property | Temperature | Value |
---|---|---|
Density | 23.0 °C | 8.75 - 8.9 g/cm³ Show Material materials with Density of 8.75 - 8.9 g/cm³ |
Dimension
Property | Value | Comment | |
---|---|---|---|
Diameter | 1.27 - 12.7 mm Show Material materials with Diameter of 1.27 - 12.7 mm | ||
Length | 610 - 91000 mm Show Material materials with Length of 610 - 91000 mm | max. Rod and Bar | |
Outside diameter | 0.76 - 76 mm Show Material materials with Outside diameter of 0.76 - 76 mm | Rod | |
Thickness | 0.05 - 76 mm Show Material materials with Thickness of 0.05 - 76 mm | Bar | |
Width | 1.27 - 559 mm Show Material materials with Width of 1.27 - 559 mm | ||
Wall thickness | Typically 10 to 20% of OD |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Bendability 90°, bw | 23.0 °C | 2 [-] Show Material materials with Bendability 90°, bw of 2 [-] | for strip with 0.25mm and thinner. |
Bendability 90°, gw | 23.0 °C | 1 [-] Show Material materials with Bendability 90°, gw of 1 [-] | for strip with 0.25mm and thinner. |
Elastic modulus | 23.0 °C | 120 - 138 GPa Show Material materials with Elastic modulus of 120 - 138 GPa | |
Elongation | 23.0 °C | 5 - 25 % Show Material materials with Elongation of 5 - 25 % | for strip with 0.1mm and thicker.,min. |
Hardness, Rockwell C | 23.0 °C | 18 - 26 [-] Show Material materials with Hardness, Rockwell C of 18 - 26 [-] | |
Hardness, Vickers | 23.0 °C | 216 - 287 [-] Show Material materials with Hardness, Vickers of 216 - 287 [-] | |
Shear modulus | 23.0 °C | 52 GPa Show Material materials with Shear modulus of 52 GPa | |
Tensile strength | 23.0 °C | 750 - 970 MPa Show Material materials with Tensile strength of 750 - 970 MPa | |
Yield strength Rp0.2 | 23.0 °C | 650 - 900 MPa Show Material materials with Yield strength Rp0.2 of 650 - 900 MPa |
Thermal
Property | Temperature | Value |
---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.6E-5 - 1.76E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.6E-5 - 1.76E-5 1/K |
Melting point | 1030 - 1040 °C Show Material materials with Melting point of 1030 - 1040 °C | |
Specific heat capacity | 23.0 °C | 390 J/(kg·K) Show Material materials with Specific heat capacity of 390 J/(kg·K) |
Thermal conductivity | 23.0 °C | 167 - 260 W/(m·K) Show Material materials with Thermal conductivity of 167 - 260 W/(m·K) |
Electrical
Property | Temperature | Value |
---|---|---|
Electrical resistivity | 23.0 °C | 3.8E-8 - 3.8E-6 Ω·m Show Material materials with Electrical resistivity of 3.8E-8 - 3.8E-6 Ω·m |
Specific Electrical conductivity | 45 - 60 % IACS Show Material materials with Specific Electrical conductivity of 45 - 60 % IACS |
Chemical properties
Property | Value | Comment |
---|---|---|
Aluminium | 0 - 0.2 % Show Material materials with Aluminium of 0 - 0.2 % | |
Beryllium | 0.2 - 0.6 % Show Material materials with Beryllium of 0.2 - 0.6 % | |
Cobalt | 0 - 0.3 % Show Material materials with Cobalt of 0 - 0.3 % | |
Copper | 95.9 - 98.4 % Show Material materials with Copper of 95.9 - 98.4 % | Balance |
Iron | 0 - 0.1 % Show Material materials with Iron of 0 - 0.1 % | |
Nickel | 1.4 - 2.2 % Show Material materials with Nickel of 1.4 - 2.2 % | |
Other | 0 - 0.5 % Show Material materials with Other of 0 - 0.5 % | |
Silicon | 0 - 0.2 % Show Material materials with Silicon of 0 - 0.2 % |
Technological properties
Property | ||
---|---|---|
Application areas | Typical applications include high reliability spring contacts for switches and relays.,Aerospace: Landing gear, bearing bushes and high performance fasteners;Automotive: Valve guides, bushes and valve seats;Offshore & marine: Offshore drilling and instrumentation equipment, downhole tooling, valve, pump and shaft components;Other: Deep drawing tooling, plastic moulding dies, tools and plungers, die-casting plunger tips, non-magnetic and non sparking tools, electrical and electronic connectors, springs, fasteners, switchgear, resistance welding electrodes and equipment, flash butt welding dies and inserts, seam welding electrode shafts,Typical applications include resistance welding components, and inserts for metal die casting, injection molding and blow molding.,Typical applications include dies casting plunger tips and dies for steel extrusion.,Typical applications include heat exchanger tubing and resistance welding components.,Typical applications include coil springs and formed wire contacts. | |
Corrosion properties | High corrosion resistance | |
General machinability | Very good machinability |