Properties
General
| Property | Value | Testing Standard |
|---|---|---|
Density | 1.03 - 1.09 g/cm³ Show Supplier Material materials with Density of 1.03 - 1.09 g/cm³ | ASTM D792 |
Mechanical
| Property | Temperature | Value | Testing Standard | Comment |
|---|---|---|---|---|
Compression set | 23 °C | 14.9 [-] Show Supplier Material materials with Compression set of 14.9 [-] | ASTM D395 B | |
70 °C | 47.1 [-] Show Supplier Material materials with Compression set of 47.1 [-] | ASTM D395 B | ||
Elongation | 609.2 % Show Supplier Material materials with Elongation of 609.2 % | ASTM D412 | 500 mm/min | |
Hardness, Shore A | 27 - 33 [-] Show Supplier Material materials with Hardness, Shore A of 27 - 33 [-] | ASTM D2240 | ||
Modulus at 100% elongation | 0.00057 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.00057 GPa | ASTM D412 | 500 mm/min | |
Modulus at 300% elongation | 0.00097 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.00097 GPa | ASTM D412 | 500 mm/min | |
Tear strength | 8.5 kN/m Show Supplier Material materials with Tear strength of 8.5 kN/m | ASTM D624 Die C | 500 mm/min | |
Tensile strength | 1.7 MPa Show Supplier Material materials with Tensile strength of 1.7 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt mass-flow rate | 68.2 g/10min Show Supplier Material materials with Melt mass-flow rate of 68.2 g/10min | ASTM D1238 | 190°C/2.16kg |
Shrinkage | 1.4 - 2 % Show Supplier Material materials with Shrinkage of 1.4 - 2 % | ASTM D955 | Transverse |
1.5 - 2.1 % Show Supplier Material materials with Shrinkage of 1.5 - 2.1 % | ASTM D955 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Bicycle grip, toothbrush, razor grip | |
| Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3 | |
| Color | White | |
| Fillers | Calcium Carbonate | |
| Other | Overmolding capabilities: PP | |