Elastocon® 2825PE

Want to keep this datasheet? Save it now in your required format

Description

Thermoplastic elastomer developed for applications that require rubber-like properties and a good surface finish.

This material data has been provided by Primeline Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTemperatureComment

Density

0.88 g/cm³

Show Supplier Material materials with Density of 0.88 g/cm³ at 20.0 °C

20.0 °C

ASTM D792

Mechanical

PropertyValueTemperatureComment

Elongation

543 %

Show Supplier Material materials with Elongation of 543 % at 20.0 °C

20.0 °C

ASTM D412

Hardness, Shore A

25 [-]

Show Supplier Material materials with Hardness, Shore A of 25 [-] at 20.0 °C

20.0 °C

ASTM D2240

Modulus at 100% elongation

0.74 GPa

Show Supplier Material materials with Modulus at 100% elongation of 0.74 GPa at 20.0 °C

20.0 °C

ASTM D412

Tear strength

9.82 kN/m

Show Supplier Material materials with Tear strength of 9.82 kN/m at 20.0 °C

20.0 °C

ASTM D624

Tensile strength

2.4 MPa

Show Supplier Material materials with Tensile strength of 2.4 MPa at 20.0 °C

20.0 °C

ASTM D412

Technological properties

Property
Application areas

Elastocon® 2825PE is FDA compliant and well suited for consumer goods and industrial applications requiring UV stability.

Other

Elastocon® 2825PE thermoplastic elastomer compound does not require drying. Elastocon® thermoplastic elastomers are not compatible with flexible PVC and should not be blended with or used in an application where direct contact is intended. It can be overmolded and coextruded with polyethylene.

Processing methods

Injection molding, extrusion, blow molding.