General
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23 °C | 6.1 GPa Show Supplier Material materials with Elastic modulus of 6.1 GPa | ISO 527-2/2 |
Elongation | 23 °C | 2 % Show Supplier Material materials with Elongation of 2 % | ISO 527-2/50 |
Flexural modulus | 23 °C | 5.4 GPa Show Supplier Material materials with Flexural modulus of 5.4 GPa | ISO 527-2/2 |
Impact strength, Charpy unnotched | 23 °C | 15 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 15 kJ/m² | ISO 179/1eU |
Tensile strength | 23 °C | 48 MPa Show Supplier Material materials with Tensile strength of 48 MPa | ISO 527-2/50 |
Thermal
Property | Value |
---|---|
Flammability | UL94: HB |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 23 °C | 8 g/10min Show Supplier Material materials with Melt mass-flow rate of 8 g/10min | ISO 1133, 220°C/5kg |
Technological properties
Property | ||
---|---|---|
Certifications | ||
Fillers | 50% S-Wood Fiber | |
Other | General safety instructions, read also Process instructions: | |
Processing methods | Drying: 2 hours at 105°C Injection moulding machine Temperatures: The below instructions may differ on due to injection speed, machine etc. Read process intructions. |