DuraSense® 3D Plus 50

Alternative and trade names
PP-WF50

Want to keep this datasheet? Save it now in your required format

Description

Polypropylene (PP) reinforced with 50% S-Wood fiber (Biocomposite).

This grade is also available as biobased polypropylene (PP).

Physical properties are measured at 23°C and 50% RH

Related Standards

This material data has been provided by Stora Enso Biocomposites.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Bio-based content		50.0 % Show Supplier Material materials with Bio-based content of 50.0 %
Density	23 °C	1.1 g/cm³ Show Supplier Material materials with Density of 1.1 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23 °C	2.7 GPa Show Supplier Material materials with Elastic modulus of 2.7 GPa	ISO 527-2/2
Elongation	23 °C	7 % Show Supplier Material materials with Elongation of 7 %	ISO 527-2/50
Flexural modulus	23 °C	2.8 GPa Show Supplier Material materials with Flexural modulus of 2.8 GPa	ISO 527-2/2
Impact strength, Charpy unnotched	23 °C	12 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 12 kJ/m²	ISO 179/1eU
Tensile strength	23 °C	45 MPa Show Supplier Material materials with Tensile strength of 45 MPa	ISO 527-2/50

Thermal

Property	Value
Flammability	UL94: HB

Technological properties

Property
Certifications	Chemical substances: REACH Compliant Raw material: FSC/PEFC™ Chain of Custody Food Applications: EU10/2011, GB4806.6-2016 Production: Approved according to GMP (Good Manufacturing Practice) Toys: EN 71-3, GB 6675.1-2014 ISO certifications: ISO 9001/14001/50001/ OHSAS18001 International Sustainability and Carbon Certification: ICSS Plus
Fillers	50% S-Wood Fiber
Other	General safety instructions, read also Process instructions: Avoid high temperatures an long residence time. At high temperature fibers may degrade and can result in pressure build up in machine. Avoid large piles of purged material, can start to smolder Keep reject material from flammable materials, let cool before disposal i.e in water
Processing methods	Drying: 4 hours at 100°C 3D Extrusion DuraSense® 3D comes in pellet form and is meant to be used in extrusion deposition printing. It is important for optimal surface of the printed material that a significant pressure is built up behind the nozzle. This can be accomplished by setting the layer thickness higher than the actual nozzle diameter. Temperatures: DuraSense® can be melted around 170°C and processed up to 205°C. DuraSense® is sensitive to prolonged exposure to temperatures above 180°C. Avoid unnecessary heating and residence time. Do not set any zones above 205°C. Nozzle: DuraSense® 3D can be used with nozzle diameters equal to or larger than 2mm.

DuraSense® 3D Plus 50

Description

Related Standards

Ashby charts

Applications

Materials by this supplier

Properties