Allgemein
Property | Value |
---|---|
Relative Dichte | 8.82 [-] Show Supplier Material materials with Relative Dichte of 8.82 [-] |
Mechanisch
Property | Value | Comment |
---|---|---|
Biegemodul | 105 GPa Show Supplier Material materials with Biegemodul of 105 GPa | |
Dehnung | 5 % Show Supplier Material materials with Dehnung of 5 % | min. | EH Temper | for thickness 0.2-5 mm |
8 % Show Supplier Material materials with Dehnung of 8 % | min. | H Temper | for thickness 0.1-5 mm | |
20 % Show Supplier Material materials with Dehnung of 20 % | min. | 1/2H Temper | for thickness 0.1-5 mm | |
35 % Show Supplier Material materials with Dehnung of 35 % | min. | 1/4H Temper | for thickness 0.1-5 mm | |
42 % Show Supplier Material materials with Dehnung of 42 % | min. | O Temper | for thickness 0.1-5 mm | |
Elastizitätsmodul | 115 GPa Show Supplier Material materials with Elastizitätsmodul of 115 GPa | |
Härte, Vickers | 100 - 160 [-] Show Supplier Material materials with Härte, Vickers of 100 - 160 [-] | 1/4H Temper | for thickness 0.1-5 mm |
150 - 205 [-] Show Supplier Material materials with Härte, Vickers of 150 - 205 [-] | 1/2H Temper | for thickness 0.1-5 mm | |
180 - 230 [-] Show Supplier Material materials with Härte, Vickers of 180 - 230 [-] | H Temper | for thickness 0.1-5 mm | |
200 - 240 [-] Show Supplier Material materials with Härte, Vickers of 200 - 240 [-] | EH Temper | for thickness 0.05-5 mm | |
210 [-] Show Supplier Material materials with Härte, Vickers of 210 [-] | min. | SH Temper | for thickness 0.05-5 mm | |
Zugfestigkeit | 315 MPa Show Supplier Material materials with Zugfestigkeit of 315 MPa | min. | O Temper | for thickness 0.1-5 mm |
390 - 510 MPa Show Supplier Material materials with Zugfestigkeit of 390 - 510 MPa | 1/4H Temper | for thickness 0.1-5 mm | |
490 - 610 MPa Show Supplier Material materials with Zugfestigkeit of 490 - 610 MPa | 1/2H Temper | for thickness 0.1-5 mm | |
590 - 685 MPa Show Supplier Material materials with Zugfestigkeit of 590 - 685 MPa | H Temper | for thickness 0.1-5 mm | |
635 - 720 MPa Show Supplier Material materials with Zugfestigkeit of 635 - 720 MPa | EH Temper | for thickness 0.1-5 mm | |
690 MPa Show Supplier Material materials with Zugfestigkeit of 690 MPa | min. | SH Temper | for thickness 0.1-5 mm |
Thermisch
Property | Value |
---|---|
Koeffizient der thermischen Ausdehnung | 1.82e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.82e-05 1/K |
Schmelzpunkt | 900 - 1040 °C Show Supplier Material materials with Schmelzpunkt of 900 - 1040 °C |
Spezifische Wärmekapazität | 375 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 375 J/(kg·K) |
Wärmeleitfähigkeit | 67 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 67 W/(m·K) |
Elektrisch
Property | Value |
---|---|
Specific Electrical conductivity | 14 % IACS Show Supplier Material materials with Specific Electrical conductivity of 14 % IACS |
Chemical properties
Property | Value | Comment |
---|---|---|
Andere | 99.5 % Show Supplier Material materials with Andere of 99.5 % | min. | Cu+Sn+P |
Blei | 0.02 % Show Supplier Material materials with Blei of 0.02 % | max. |
Eisen | 0.1 % Show Supplier Material materials with Eisen of 0.1 % | max. |
Phosphor | 0.03 - 0.35 % Show Supplier Material materials with Phosphor of 0.03 - 0.35 % | |
Zink | 0.2 % Show Supplier Material materials with Zink of 0.2 % | max. |
Zinn | 5.5 - 7 % Show Supplier Material materials with Zinn of 5.5 - 7 % |
Technological properties
Property | ||
---|---|---|
Application areas | The grade is particularly suitable for electronics (connectors, lead frames, lead terminals, transistor terminals, etc.), electrical (relay and switch contacts, rotary switch slides and contacts, fuse clips, etc.), automotive (bearing frames, hydraulic equipment caps, packing, bearings, clutch disks, electrical parts, etc.) and others (bellows, slides, blades, plate springs, corrosion-proof machinery equipment, diaphragms, etc.) | |
Coating | Standard product specification of a HOT-DIP-tinned strip. *Width means the slit width after plating. *Different plating thickness for each side is possible. * We can accommodate our products to individual specifications other than the above standard specifications. Please feel free to call us. | |
Other | Hardness Vickers note: Minimum test force is 1.961 N | |
Tolerances |