Akulon® S240-C

Want to keep this datasheet? Save it now in your required format

Description

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.

Datasheet URL:

Akulon® S240-C

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Absorción de agua	9 % Show Supplier Material materials with Absorción de agua of 9 %	dry	Sim. to ISO 62
Densidad	1.14 g/cm³ Show Supplier Material materials with Densidad of 1.14 g/cm³	dry	ISO 1183
Moisture absorption	2.5 % Show Supplier Material materials with Moisture absorption of 2.5 %	dry	Sim. to ISO 62

Mecánica

Property	Value	Condition	Testing Standard
Elongación	50 % Show Supplier Material materials with Elongación of 50 %	dry	ISO 527-1/-2
Elongation at yield	4 % Show Supplier Material materials with Elongation at yield of 4 %	dry	ISO 527-1/-2
Módulo elástico	3 GPa Show Supplier Material materials with Módulo elástico of 3 GPa	dry	ISO 527-1/-2
Resistencia a la tracción	58.0 MPa Show Supplier Material materials with Resistencia a la tracción of 58.0 MPa	dry	ISO 527-1/-2

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	9e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9e-07 1/K	dry	ISO 11359-1/-2			Parallel
	9e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9e-07 1/K	dry	ISO 11359-1/-2			Normal
Relative temperature index, electrical	65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C	dry	UL746B	3 mm
Relative temperature index, mechanical impact	65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	dry	UL746B	3 mm
Relative temperature index, mechanical strength	65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	dry	UL746B	3 mm
Temperatura de flexión bajo carga	70 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 70 °C	dry	ISO 75-1/-2		2 MPa
	215 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 215 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C	dry	ISO 11357-1/-3			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	3.3 [-] Show Supplier Material materials with Constante dieléctrica of 3.3 [-]	dry	IEC 62631-2-1	1MHz
	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 62631-2-1	100Hz
Factor de disipación	90 [-] Show Supplier Material materials with Factor de disipación of 90 [-]	dry	IEC 62631-2-1	100Hz
	220 [-] Show Supplier Material materials with Factor de disipación of 220 [-]	dry	IEC 62631-2-1	1MHz
Rigidez dieléctrica	25 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 25 kV/mm	dry	IEC 60243-1
Volume resistivity	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1

Rheological Properties

Property	Value	Condition	Testing Standard
Viscosity number	280 cm³/gr Show Supplier Material materials with Viscosity number of 280 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Application areas	Smokable Sausage Casings
Certifications	Food Contact, Yellow Card Available

Akulon® S240-C

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades