EcoPaXX® Q-Y

Nombres alternativos y comerciales
PA410-I

Want to keep this datasheet? Save it now in your required format

Description

EcoPaXX® is our bio-based, high-performance polyamide (PA410) that offers outstanding performance across the board, while being made mainly from tropical castor beans which don’t compete with the food chain.
EcoPaXX® belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding of environments. That includes excellent chemical resistance, low moisture absorption, combined with a very high melting point (highest of all bio-plastics) and high crystallization rate (typical for engineering plastics like PA66 and PA46).
EcoPaXX® has the lowest carbon footprint amongst common polyamides. This is because the amount of carbon dioxide emitted during the production of EcoPaXX® is offset by the amount absorbed in plant growth, and in particular by the riccinus communis – the tropical castor bean plant that makes up some 70% of EcoPaXX®. Externally certified lifecycle analysis (LCA) data is available upon request.

Datasheet URL:

EcoPaXX® Q-Y

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	66 % Show Supplier Material materials with Bio-based content of 66 %	dry	ASTM D6866-12 Method B
Densidad	1.08 g/cm³ Show Supplier Material materials with Densidad of 1.08 g/cm³	dry	ISO 1183
Moisture absorption	1.8 % Show Supplier Material materials with Moisture absorption of 1.8 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		78 [-] Show Supplier Material materials with Dureza Shore D of 78 [-]	dry	ISO 868	15s
Elongación		45 % Show Supplier Material materials with Elongación of 45 %	dry	ISO 527-1/-2
		50 % Show Supplier Material materials with Elongación of 50 %	conditioned	ISO 527-1/-2
Flexural yield strength		50 MPa Show Supplier Material materials with Flexural yield strength of 50 MPa	conditioned	ISO 178
		95 MPa Show Supplier Material materials with Flexural yield strength of 95 MPa	dry	ISO 178
Módulo de flexión		1.3 GPa Show Supplier Material materials with Módulo de flexión of 1.3 GPa	conditioned	ISO 178
		2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	dry	ISO 178
Módulo elástico		1.3 GPa Show Supplier Material materials with Módulo elástico of 1.3 GPa	conditioned	ISO 527-1/-2
		2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	dry	ISO 527-1/-2
Resistencia a la tracción		50 MPa Show Supplier Material materials with Resistencia a la tracción of 50 MPa	conditioned	ISO 527-1/-2
		65 MPa Show Supplier Material materials with Resistencia a la tracción of 65 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	dry	ISO 179/1eA
	23 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	dry	ISO 179/1eA
	23 °C	20 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 20 kJ/m²	conditioned	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Pressure	Comment
Temperatura de flexión bajo carga	76 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 76 °C	dry	ISO 75-1/-2	2 MPa
	165 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 165 °C	dry	ISO 75-1/-2	0.45 MPa
Temperatura de fusión	250 °C Show Supplier Material materials with Temperatura de fusión of 250 °C	dry	ISO 11357-1/-3		10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Rigidez dieléctrica	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	conditioned	IEC 60243-1
	34 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 34 kV/mm	dry	IEC 60243-1
Volume resistivity	1e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm	conditioned	IEC 62631-3-1
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	conditioned	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	1 % Show Supplier Material materials with Contracción of 1 %	dry	ISO 294-4	Normal
	1.2 % Show Supplier Material materials with Contracción of 1.2 %	dry	ISO 294-4	Parallel

Technological properties

Property

EcoPaXX® Q-Y

Description

Ashby charts

Materiales de este proveedor

Propiedades