Arnite® A02 307

Want to keep this datasheet? Save it now in your required format

Description

Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET) and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.

Datasheet URL:

Arnite® A02 307

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Densidad	1.39 g/cm³ Show Supplier Material materials with Densidad of 1.39 g/cm³	dry	ISO 1183
Moisture absorption	0.3 % Show Supplier Material materials with Moisture absorption of 0.3 %	dry	Sim. to ISO 62

Mecánica

Property	Value	Condition	Testing Standard
Módulo elástico	2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	dry	ISO 527-1/-2
Resistencia a la tracción	58.0 MPa Show Supplier Material materials with Resistencia a la tracción of 58.0 MPa	dry	ISO 527-1/-2

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Pressure	Comment
Temperatura de flexión bajo carga	68 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 68 °C	dry	ISO 75-1/-2	0.45 MPa
Temperatura de fusión	255 °C Show Supplier Material materials with Temperatura de fusión of 255 °C	dry	ISO 11357-1/-3		10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Volume resistivity	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	1.6 % Show Supplier Material materials with Contracción of 1.6 %	dry	ISO 294-4	Parallel
	1.6 % Show Supplier Material materials with Contracción of 1.6 %	dry	ISO 294-4	Normal
Viscosity number	85 cm³/gr Show Supplier Material materials with Viscosity number of 85 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Certifications	Food Contact

Arnite® A02 307

Description

Ashby charts

Materiales de este proveedor

Propiedades