EcoPaXX® Q-HG6

Nombres alternativos y comerciales
PA410-GF30

Want to keep this datasheet? Save it now in your required format

Description

EcoPaXX® is our bio-based, high-performance polyamide (PA410) that offers outstanding performance across the board, while being made mainly from tropical castor beans which don’t compete with the food chain.
EcoPaXX® belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding of environments. That includes excellent chemical resistance, low moisture absorption, combined with a very high melting point (highest of all bio-plastics) and high crystallization rate (typical for engineering plastics like PA66 and PA46).
EcoPaXX® has the lowest carbon footprint amongst common polyamides. This is because the amount of carbon dioxide emitted during the production of EcoPaXX® is offset by the amount absorbed in plant growth, and in particular by the riccinus communis – the tropical castor bean plant that makes up some 70% of EcoPaXX®. Externally certified lifecycle analysis (LCA) data is available upon request.

Datasheet URL:

EcoPaXX® Q-HG6

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	70 % Show Supplier Material materials with Bio-based content of 70 %	dry	ASTM D6866-12 Method B
Densidad	1.34 g/cm³ Show Supplier Material materials with Densidad of 1.34 g/cm³	dry	ISO 1183
Moisture absorption	1.5 % Show Supplier Material materials with Moisture absorption of 1.5 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Elongación		3.8 % Show Supplier Material materials with Elongación of 3.8 %	dry	ISO 527-1/-2
		5.8 % Show Supplier Material materials with Elongación of 5.8 %	conditioned	ISO 527-1/-2
	120 °C	8.2 % Show Supplier Material materials with Elongación of 8.2 %	dry	ISO 527-1/-2
	160 °C	9.4 % Show Supplier Material materials with Elongación of 9.4 %	dry	ISO 527-1/-2
	180 °C	10 % Show Supplier Material materials with Elongación of 10 %	dry	ISO 527-1/-2
	200 °C	10 % Show Supplier Material materials with Elongación of 10 %	dry	ISO 527-1/-2
Flexural yield strength		185 MPa Show Supplier Material materials with Flexural yield strength of 185 MPa	conditioned	ISO 178
		260 MPa Show Supplier Material materials with Flexural yield strength of 260 MPa	dry	ISO 178
	120 °C	145 MPa Show Supplier Material materials with Flexural yield strength of 145 MPa	dry	ISO 178
Módulo de flexión		6.3 GPa Show Supplier Material materials with Módulo de flexión of 6.3 GPa	conditioned	ISO 178
		8.5 GPa Show Supplier Material materials with Módulo de flexión of 8.5 GPa	dry	ISO 178
	120 °C	4.8 GPa Show Supplier Material materials with Módulo de flexión of 4.8 GPa	dry	ISO 178
Módulo elástico		7 GPa Show Supplier Material materials with Módulo elástico of 7 GPa	conditioned	ISO 527-1/-2
		9.2 GPa Show Supplier Material materials with Módulo elástico of 9.2 GPa	dry	ISO 527-1/-2
	120 °C	4.6 GPa Show Supplier Material materials with Módulo elástico of 4.6 GPa	dry	ISO 527-1/-2
	160 °C	3.7 GPa Show Supplier Material materials with Módulo elástico of 3.7 GPa	dry	ISO 527-1/-2
	180 °C	3.2 GPa Show Supplier Material materials with Módulo elástico of 3.2 GPa	dry	ISO 527-1/-2
	200 °C	3 GPa Show Supplier Material materials with Módulo elástico of 3 GPa	dry	ISO 527-1/-2
Resistencia a la tracción		115 MPa Show Supplier Material materials with Resistencia a la tracción of 115 MPa	conditioned	ISO 527-1/-2
		170 MPa Show Supplier Material materials with Resistencia a la tracción of 170 MPa	dry	ISO 527-1/-2
	120 °C	85 MPa Show Supplier Material materials with Resistencia a la tracción of 85 MPa	dry	ISO 527-1/-2
	160 °C	70 MPa Show Supplier Material materials with Resistencia a la tracción of 70 MPa	dry	ISO 527-1/-2
	180 °C	65 MPa Show Supplier Material materials with Resistencia a la tracción of 65 MPa	dry	ISO 527-1/-2
	200 °C	60 MPa Show Supplier Material materials with Resistencia a la tracción of 60 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	dry	ISO 179/1eA
	23 °C	11 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 11 kJ/m²	dry	ISO 179/1eA
	23 °C	15 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	conditioned	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	-30 °C	60 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 60 kJ/m²	dry	ISO 179/1eU
	23 °C	80 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 80 kJ/m²	dry, conditioned	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Pressure	Comment
Coeficiente de dilatación térmica	3.2e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3.2e-07 1/K	dry	ISO 11359-1/-2		Parallel
	6.6e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.6e-07 1/K	dry	ISO 11359-1/-2		Normal
Temperatura de flexión bajo carga	215 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 215 °C	dry	ISO 75-1/-2	2 MPa
	243 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 243 °C	dry	ISO 75-1/-2	0.45 MPa
Temperatura de fusión	250 °C Show Supplier Material materials with Temperatura de fusión of 250 °C	dry	ISO 11357-1/-3		10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Surface resistivity	1e+13 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+13 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	conditioned	IEC 62631-3-1
	1e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm	dry	IEC 62631-3-1

Rheological Properties

Property	Temperature	Value	Condition	Testing Standard	Comment
Contracción		0.5 % Show Supplier Material materials with Contracción of 0.5 %	dry	ISO 294-4	Parallel
		1 % Show Supplier Material materials with Contracción of 1 %	dry	ISO 294-4	Normal
Velocidad de flujo de la masa derretida	290 °C	42 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 42 g/10min	dry	ISO 1133
Velocidad de flujo del volumen derretido	290 °C	36 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 36 cm³/10min	dry	ISO 1133

Technological properties

Property
Application areas	Window profiles, Snowboard bindings, Mountaineering shoes, Coolant Hose T-Connectors, Charge Air Cooler Caps, Fuel System: Various Components, Fuel Line Connectors, Automotive Connectors, Temperature Sensor, Speed Sensor, Positition Sensor, Wheel Speed Sensors, Coolant expansion tank, Radiator end tanks, Coolant connectors
Fillers	30% Glass Fiber

EcoPaXX® Q-HG6

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades