Stanyl® TS272A1

Nombres alternativos y comerciales
(PA46+PTFE)-AF

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® TS272A1

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	3.1 % Show Supplier Material materials with Absorción de agua of 3.1 %	dry	ISO 62	at 23°C after 24h
	11.3 % Show Supplier Material materials with Absorción de agua of 11.3 %	dry	Sim. to ISO 62
Densidad	1.26 g/cm³ Show Supplier Material materials with Densidad of 1.26 g/cm³	dry	ISO 1183
Moisture absorption	3 % Show Supplier Material materials with Moisture absorption of 3 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Elongación		20 % Show Supplier Material materials with Elongación of 20 %	dry	ISO 527-1/-2
Flexural yield strength		100 MPa Show Supplier Material materials with Flexural yield strength of 100 MPa	dry	ISO 178
Módulo de flexión		2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	dry	ISO 178
Módulo elástico		2.8 GPa Show Supplier Material materials with Módulo elástico of 2.8 GPa	dry	ISO 527-1/-2
Resistencia a la tracción		80 MPa Show Supplier Material materials with Resistencia a la tracción of 80 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	23 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m²	dry	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Pressure	Comment
Temperatura de flexión bajo carga	160 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 160 °C	dry	ISO 75-1/-2	2 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3		10°C/min
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2		10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	2.2 % Show Supplier Material materials with Contracción of 2.2 %	dry	ISO 294-4	Parallel
	2.2 % Show Supplier Material materials with Contracción of 2.2 %	dry	ISO 294-4	Normal

Technological properties

Property
Application areas	Front End Accessory Drive Parts: Belt Tensioner,Damping bands, Shoes and Bushings
Fillers	Aramid Fiber

Stanyl® TS272A1

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades