Akulon® Fuel Lock FLE40-HP

Nombres alternativos y comerciales
PA6-I

Want to keep this datasheet? Save it now in your required format

Description

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.

Datasheet URL:

Akulon® Fuel Lock FLE40-HP

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Absorción de agua	7.3 % Show Supplier Material materials with Absorción de agua of 7.3 %	dry	Sim. to ISO 62
Densidad	1.06 g/cm³ Show Supplier Material materials with Densidad of 1.06 g/cm³	dry	ISO 1183
Moisture absorption	2.7 % Show Supplier Material materials with Moisture absorption of 2.7 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	dry, conditioned	ISO 527-1/-2
Elongation at yield		4 % Show Supplier Material materials with Elongation at yield of 4 %	dry	ISO 527-1/-2
Flexural yield strength		71 MPa Show Supplier Material materials with Flexural yield strength of 71 MPa	dry	ISO 178
Módulo de flexión		1.8 GPa Show Supplier Material materials with Módulo de flexión of 1.8 GPa	dry	ISO 178
Módulo elástico		0.5 GPa Show Supplier Material materials with Módulo elástico of 0.5 GPa	conditioned	ISO 527-1/-2
		1.9 GPa Show Supplier Material materials with Módulo elástico of 1.9 GPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	18 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 18 kJ/m²	conditioned	ISO 179/1eA
	-30 °C	25 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 25 kJ/m²	dry	ISO 179/1eA
	23 °C	100 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 100 kJ/m²	dry	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de reblandecimiento Vicat	130 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 130 °C	dry	ISO 306	50°C/h 50N

Rheological Properties

Property	Temperature	Value	Condition	Testing Standard
Velocidad de flujo del volumen derretido	275 °C	35 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 35 cm³/10min	dry	ISO 1133

Technological properties

Property
Application areas	High pressure type IV composite fuel tanks

Akulon® Fuel Lock FLE40-HP

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades