Stanyl® TS250F8

Nombres alternativos y comerciales
PA46-GF40 FR(17)

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® TS250F8

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	1.3 % Show Supplier Material materials with Absorción de agua of 1.3 %	dry	ISO 62	at 23°C after 24h
	4.6 % Show Supplier Material materials with Absorción de agua of 4.6 %	dry	Sim. to ISO 62
Densidad	1.77 g/cm³ Show Supplier Material materials with Densidad of 1.77 g/cm³	dry	ISO 1183
Moisture absorption	1.3 % Show Supplier Material materials with Moisture absorption of 1.3 %	dry	Sim. to ISO 62
Índice límite de óxigeno	37 % Show Supplier Material materials with Índice límite de óxigeno of 37 %	dry	ISO 4589-1/-2

Mecánica

Property	Temperature	Value	Condition	Thickness	Testing Standard	Comment
Elongación		1.8 % Show Supplier Material materials with Elongación of 1.8 %	dry	1 mm	ISO 527-1/-2
		2 % Show Supplier Material materials with Elongación of 2 %	dry		ISO 527-1/-2
		2.6 % Show Supplier Material materials with Elongación of 2.6 %	conditioned		ISO 527-1/-2
	120 °C	3 % Show Supplier Material materials with Elongación of 3 %	dry		ISO 527-1/-2
	160 °C	5 % Show Supplier Material materials with Elongación of 5 %	dry		ISO 527-1/-2
Flexural yield strength		250 MPa Show Supplier Material materials with Flexural yield strength of 250 MPa	conditioned		ISO 178
		300 MPa Show Supplier Material materials with Flexural yield strength of 300 MPa	dry		ISO 178
	120 °C	230 MPa Show Supplier Material materials with Flexural yield strength of 230 MPa	dry		ISO 178
	160 °C	200 MPa Show Supplier Material materials with Flexural yield strength of 200 MPa	dry		ISO 178
Módulo de flexión		10 GPa Show Supplier Material materials with Módulo de flexión of 10 GPa	conditioned		ISO 178
		14 GPa Show Supplier Material materials with Módulo de flexión of 14 GPa	dry		ISO 178
	120 °C	8.5 GPa Show Supplier Material materials with Módulo de flexión of 8.5 GPa	dry		ISO 178
	160 °C	5.5 GPa Show Supplier Material materials with Módulo de flexión of 5.5 GPa	dry		ISO 178
Módulo elástico		11 GPa Show Supplier Material materials with Módulo elástico of 11 GPa	conditioned		ISO 527-1/-2
		16 GPa Show Supplier Material materials with Módulo elástico of 16 GPa	dry		ISO 527-1/-2
		16 GPa Show Supplier Material materials with Módulo elástico of 16 GPa	dry	1 mm	ISO 527-1/-2
	120 °C	9.5 GPa Show Supplier Material materials with Módulo elástico of 9.5 GPa	dry		ISO 527-1/-2
	160 °C	6.5 GPa Show Supplier Material materials with Módulo elástico of 6.5 GPa	dry		ISO 527-1/-2
Resistencia a la tracción		130 MPa Show Supplier Material materials with Resistencia a la tracción of 130 MPa	conditioned		ISO 527-1/-2
		200 MPa Show Supplier Material materials with Resistencia a la tracción of 200 MPa	dry		ISO 527-1/-2
		200 MPa Show Supplier Material materials with Resistencia a la tracción of 200 MPa	dry	1 mm	ISO 527-1/-2	at low thickness
	120 °C	110 MPa Show Supplier Material materials with Resistencia a la tracción of 110 MPa	dry		ISO 527-1/-2
	160 °C	90 MPa Show Supplier Material materials with Resistencia a la tracción of 90 MPa	dry		ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	dry, conditioned		ISO 179/1eA
	23 °C	14.0 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14.0 kJ/m²	dry, conditioned		ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	2.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5e-07 1/K	dry	ISO 11359-1/-2			Normal
Glow Wire Flammability Index	960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C	dry	IEC 60695-2-12	3 mm
	960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C	dry	IEC 60695-2-12	0.75 mm
Glow Wire Ignition Temperature	825 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 825 °C	dry	IEC 60695-2-13	0.75 mm
	960 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 960 °C	dry	IEC 60695-2-13	3 mm
Inflamabilidad	V-0	dry	IEC 60695-11-10	1.5 mm		UL recognition :Yes
Relative temperature index, electrical	140 °C Show Supplier Material materials with Relative temperature index, electrical of 140 °C	dry	UL746B	0.75 mm
Relative temperature index, mechanical impact	110 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 110 °C	dry	UL746B	0.75 mm
Relative temperature index, mechanical strength	120 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 120 °C	dry	UL746B	0.75 mm
Temperatura de flexión bajo carga	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		2 MPa
	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de reblandecimiento Vicat	290 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 290 °C	dry	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 60250	1GHz
	3.8 [-] Show Supplier Material materials with Constante dieléctrica of 3.8 [-]	conditioned	IEC 60250	1GHz
	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 62631-2-1	1MHz
	4.3 [-] Show Supplier Material materials with Constante dieléctrica of 4.3 [-]	dry	IEC 62631-2-1	100Hz
	4.5 [-] Show Supplier Material materials with Constante dieléctrica of 4.5 [-]	conditioned	IEC 62631-2-1	1MHz
	12 [-] Show Supplier Material materials with Constante dieléctrica of 12 [-]	conditioned	IEC 62631-2-1	100Hz
Factor de disipación	60 [-] Show Supplier Material materials with Factor de disipación of 60 [-]	dry	IEC 62631-2-1	100Hz
	160 [-] Show Supplier Material materials with Factor de disipación of 160 [-]	dry	IEC 62631-2-1	1MHz
	250 [-] Show Supplier Material materials with Factor de disipación of 250 [-]	dry	IEC 60250	1GHz
	325 [-] Show Supplier Material materials with Factor de disipación of 325 [-]	conditioned	IEC 60250	1GHz
	700 [-] Show Supplier Material materials with Factor de disipación of 700 [-]	conditioned	IEC 62631-2-1	1MHz
	3300 [-] Show Supplier Material materials with Factor de disipación of 3300 [-]	conditioned	IEC 62631-2-1	100Hz
Rigidez dieléctrica	20 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 20 kV/mm	conditioned	IEC 60243-1
	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	dry	IEC 60243-1
Surface resistivity	1e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	1e+08 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+08 Ω·cm	conditioned	IEC 62631-3-1
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	350 V Show Supplier Material materials with Índice de seguimiento comparativo of 350 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.3 % Show Supplier Material materials with Contracción of 0.3 %	dry	Sim. to ISO 294-4	Parallel
	0.9 % Show Supplier Material materials with Contracción of 0.9 %	dry	Sim. to ISO 294-4	Normal
Spiral flow length	110	dry	-	1.0 mm 800 bar
	120	dry	-	1.0 mm 900 bar
	130	dry	-	1.0 mm 1000 bar
Viscosity number	150 cm³/gr Show Supplier Material materials with Viscosity number of 150 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Application areas	Reflow connectors, FPC connectors, WtB and BtB Connectors, Relay Bases
Certifications	Yellow Card Available
Fillers	40% Glass Fiber

Stanyl® TS250F8

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades