Arnite® B600 SNF

Nombres alternativos y comerciales
PBT FR
Want to keep this datasheet? Save it now in your required format

Description

Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET)  and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.

Datasheet URL:

Arnite® B600 SNF

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueConditionTesting Standard

Absorción de agua

0.4 %

Show Supplier Material materials with Absorción de agua of 0.4 %

dry

Sim. to ISO 62

Densidad

1.42 g/cm³

Show Supplier Material materials with Densidad of 1.42 g/cm³

dry

ISO 1183

Moisture absorption

0.2 %

Show Supplier Material materials with Moisture absorption of 0.2 %

dry

Sim. to ISO 62

Mecánica

PropertyTemperatureValueConditionTesting Standard

Elongation at yield

3 %

Show Supplier Material materials with Elongation at yield of 3 %

dry

ISO 527-1/-2

Módulo elástico

2.3 GPa

Show Supplier Material materials with Módulo elástico of 2.3 GPa

dry

ISO 527-1/-2

Resistencia al choque, ensayo Charpy entallado

23 °C

12 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²

dry

ISO 179/1eA

Aplicaciones térmicas

PropertyValueConditionTesting StandardPressure

Temperatura de flexión bajo carga

65 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 65 °C

dry

ISO 75-1/-2

2 MPa

145 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 145 °C

dry

ISO 75-1/-2

0.45 MPa

Eléctrico

PropertyValueConditionTesting StandardComment

Constante dieléctrica

3.2 [-]

Show Supplier Material materials with Constante dieléctrica of 3.2 [-]

dry

IEC 62631-2-1

1MHz

3.4 [-]

Show Supplier Material materials with Constante dieléctrica of 3.4 [-]

dry

IEC 62631-2-1

100Hz

Factor de disipación

30 [-]

Show Supplier Material materials with Factor de disipación of 30 [-]

dry

IEC 62631-2-1

100Hz

200 [-]

Show Supplier Material materials with Factor de disipación of 200 [-]

dry

IEC 62631-2-1

1MHz

Rheological Properties

PropertyTemperatureValueConditionTesting Standard

Velocidad de flujo del volumen derretido

260 °C

8 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 8 cm³/10min

dry

ISO 1133

Technological properties

Property