Ti6Al2Sn4Zr6Mo

Nombres alternativos y comerciales
Ti-Gr-6-2-4-6, Ti6-Al2-Sn4-Zr6-Mo, 6Al/2Sn/4Zr/6Mo, Alloy Titan 6AL-2Sn-4Zr-6Mo, Titanium 6-2-4-6

Want to keep this datasheet? Save it now in your required format

Description

Titanium 6-2-4-6 is a heat treatable alpha-beta alloy, with which you can achieve higher strengths than with Titanium 6/4. The advantages of Titanium 6-2-4-6 are an increased strength, low cycle fatigue and its ductility. It has a high strength at temperatures up to 450 ° C. Advantages of Titanium 6Al/2Sn/4Zr/6Mo

Low modulus of Elasticity

Low Density to Weight Ratio

Resistance to Fatigue

Heat Treatable to attain higher strengths

Related Standards

Equivalent Materials

UNS R56260

Los datos sobre este material han sido proporcionados por Hempel Special Metals.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	23.0 °C	4.5 g/cm³ Show Supplier Material materials with Densidad of 4.5 g/cm³

Mecánica

Property	Temperature	Value	Comment
Módulo elástico	23.0 °C	70 GPa Show Supplier Material materials with Módulo elástico of 70 GPa	114

Aplicaciones térmicas

Property	Temperature	Value
Calor específico	23.0 °C	420 J/(kg·K) Show Supplier Material materials with Calor específico of 420 J/(kg·K)
Conductividad térmica	23.0 °C	22.6 W/(m·K) Show Supplier Material materials with Conductividad térmica of 22.6 W/(m·K)
Temperatura de fusión		1595 - 1675 °C Show Supplier Material materials with Temperatura de fusión of 1595 - 1675 °C

Chemical properties

Property	Value	Comment
Aluminio	5.5 - 6.5 % Show Supplier Material materials with Aluminio of 5.5 - 6.5 %
Carbono	0.04 % Show Supplier Material materials with Carbono of 0.04 %	max.
Circonio	3.6 - 4.4 % Show Supplier Material materials with Circonio of 3.6 - 4.4 %
Cobre	0.5 % Show Supplier Material materials with Cobre of 0.5 %	max.
Hidrógeno	0.13 % Show Supplier Material materials with Hidrógeno of 0.13 %	max.
Hierro	1.5 % Show Supplier Material materials with Hierro of 1.5 %	max.
Molibdeno	5.5 - 6.5 % Show Supplier Material materials with Molibdeno of 5.5 - 6.5 %
Nitrógeno	0.04 % Show Supplier Material materials with Nitrógeno of 0.04 %	max.
Otro	0.3 % Show Supplier Material materials with Otro of 0.3 %	max.
Oxígeno	0.15 % Show Supplier Material materials with Oxígeno of 0.15 %	max.
Titanio	Balance

Technological properties

Property

Application areas

Typical applications are in the intermediate stage compressors turbines, discs, blades and sour gas applications as well as in oil and gas industry.

Other

Beta Transus: 935°C

The material is delivered with 3.1 certification. 3.2 Certification is available at extra cost.