EN 10025-4 Grade S460M thermomechanically rolled

View suppliers (10)
Want to keep this datasheet? Save it now in your required format

Description

S460M is a weldable fine-grained steel with a min. yield point of 460 N/mm². The steel is applicated in thermo mechanical rolled condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions. Subsequent heating above 580°C for thermo mechanical rolled products causes reduction of the strength properties. Application limit: at -20°C is warranted a notch impact energy of 40J (longitudinal test specimen). The carbon equivalent (by arrangement) amounts to: for nominal size: < 16 mm: 0,45% > 16 < 40 mm: 0,46% Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 12 mm can be warranted the following bending radius values: longitudinal: 5 x s transverse: 4 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Warm forming: thermo mechanical rolled products are unsuitable for warm forming.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueComment

Densidad

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Typical for Steel

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Steel

Dureza Brinell

247 [-]

Show Material materials with Dureza Brinell of 247 [-]

Predicted Value, Transverse

Elongación

12.0 %

Show Material materials with Elongación of 12.0 %

Predicted Value, A200

15.1 %

Show Material materials with Elongación of 15.1 %

Predicted Value, A80

17.5 %

Show Material materials with Elongación of 17.5 %

Predicted Value, Transverse

19.5 %

Show Material materials with Elongación of 19.5 %

Predicted Value, A80 Transverse

20.2 %

Show Material materials with Elongación of 20.2 %

Predicted Value, A5

22.6 %

Show Material materials with Elongación of 22.6 %

Predicted Value, A50

20 °C

17 %

Show Material materials with Elongación of 17 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Estricción

41.9 %

Show Material materials with Estricción of 41.9 %

Predicted Value

44.6 %

Show Material materials with Estricción of 44.6 %

Predicted Value, Transverse

Límite elástico

257.3 MPa

Show Material materials with Límite elástico of 257.3 MPa

Predicted Value, RP1

319.9 MPa

Show Material materials with Límite elástico of 319.9 MPa

Predicted Value, RP1 Transverse

427.1 MPa

Show Material materials with Límite elástico of 427.1 MPa

Predicted Value, RP02

432.5 MPa

Show Material materials with Límite elástico of 432.5 MPa

Predicted Value, Transverse

469.5 MPa

Show Material materials with Límite elástico of 469.5 MPa

Predicted Value, RP02 Transverse

515.9 MPa

Show Material materials with Límite elástico of 515.9 MPa

Predicted Value, RP05

516.7 MPa

Show Material materials with Límite elástico of 516.7 MPa

Predicted Value, RP002

20 °C

385 MPa

Show Material materials with Límite elástico of 385 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

400 MPa

Show Material materials with Límite elástico of 400 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

410 MPa

Show Material materials with Límite elástico of 410 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

430 MPa

Show Material materials with Límite elástico of 430 MPa

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

440 MPa

Show Material materials with Límite elástico of 440 MPa

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

460 MPa

Show Material materials with Límite elástico of 460 MPa

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Módulo de cizallamiento

80.3 GPa

Show Material materials with Módulo de cizallamiento of 80.3 GPa

Predicted Value

Módulo elástico

190 - 210 GPa

Show Material materials with Módulo elástico of 190 - 210 GPa

Typical for Steel

Resistencia a la tracción

20 °C

490 - 720 MPa

Show Material materials with Resistencia a la tracción of 490 - 720 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 710 MPa

Show Material materials with Resistencia a la tracción of 490 - 710 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 690 MPa

Show Material materials with Resistencia a la tracción of 490 - 690 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 680 MPa

Show Material materials with Resistencia a la tracción of 490 - 680 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 660 MPa

Show Material materials with Resistencia a la tracción of 490 - 660 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

500 - 720 MPa

Show Material materials with Resistencia a la tracción of 500 - 720 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

500 - 710 MPa

Show Material materials with Resistencia a la tracción of 500 - 710 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

500 - 690 MPa

Show Material materials with Resistencia a la tracción of 500 - 690 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

500 - 680 MPa

Show Material materials with Resistencia a la tracción of 500 - 680 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

500 - 660 MPa

Show Material materials with Resistencia a la tracción of 500 - 660 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 720 MPa

Show Material materials with Resistencia a la tracción of 510 - 720 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 710 MPa

Show Material materials with Resistencia a la tracción of 510 - 710 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 690 MPa

Show Material materials with Resistencia a la tracción of 510 - 690 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 680 MPa

Show Material materials with Resistencia a la tracción of 510 - 680 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 660 MPa

Show Material materials with Resistencia a la tracción of 510 - 660 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 720 MPa

Show Material materials with Resistencia a la tracción of 530 - 720 MPa

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

530 - 710 MPa

Show Material materials with Resistencia a la tracción of 530 - 710 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 690 MPa

Show Material materials with Resistencia a la tracción of 530 - 690 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 680 MPa

Show Material materials with Resistencia a la tracción of 530 - 680 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 660 MPa

Show Material materials with Resistencia a la tracción of 530 - 660 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

540 - 720 MPa

Show Material materials with Resistencia a la tracción of 540 - 720 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

540 - 710 MPa

Show Material materials with Resistencia a la tracción of 540 - 710 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

540 - 690 MPa

Show Material materials with Resistencia a la tracción of 540 - 690 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

540 - 680 MPa

Show Material materials with Resistencia a la tracción of 540 - 680 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

20 °C

540 - 660 MPa

Show Material materials with Resistencia a la tracción of 540 - 660 MPa

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

Resistencia al cizallamiento

525.4 MPa

Show Material materials with Resistencia al cizallamiento of 525.4 MPa

Predicted Value

Aplicaciones térmicas

PropertyValueComment

Calor específico

455.7 J/(kg·K)

Show Material materials with Calor específico of 455.7 J/(kg·K)

Predicted Value

Coeficiente de dilatación térmica

11.85 1/K

Show Material materials with Coeficiente de dilatación térmica of 11.85 1/K

Predicted Value

Conductividad térmica

37.86 W/(m·K)

Show Material materials with Conductividad térmica of 37.86 W/(m·K)

Predicted Value

Eléctrico

PropertyValueComment

Conductividad eléctrica

7 S/m

Show Material materials with Conductividad eléctrica of 7 S/m

Predicted Value

Resistividad eléctrica

35 Ω·m

Show Material materials with Resistividad eléctrica of 35 Ω·m

Predicted Value

Chemical properties

PropertyValueConditionRelated StandardsShape

Aluminio

0.02 %

Show Material materials with Aluminio of 0.02 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Azufre

0.025 %

Show Material materials with Azufre of 0.025 %

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

0.03 %

Show Material materials with Azufre of 0.03 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar

Carbono

0.16 %

Show Material materials with Carbono of 0.16 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Cobre

0.55 %

Show Material materials with Cobre of 0.55 %

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

Cromo

0.3 %

Show Material materials with Cromo of 0.3 %

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

Fósforo

0.03 %

Show Material materials with Fósforo of 0.03 %

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

0.035 %

Show Material materials with Fósforo of 0.035 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar

Manganeso

1.7 %

Show Material materials with Manganeso of 1.7 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Molibdeno

0.2 %

Show Material materials with Molibdeno of 0.2 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Niobio

0.05 %

Show Material materials with Niobio of 0.05 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Nitrógeno

0.025 %

Show Material materials with Nitrógeno of 0.025 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Níquel

0.45 %

Show Material materials with Níquel of 0.45 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar

0.8 %

Show Material materials with Níquel of 0.8 %

thermomechanically rolled

EN 10025-4, EN 10113-3

Strip, Sheet, Flat, Rod, Wire

Silicona

0.6 %

Show Material materials with Silicona of 0.6 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Titanio

0.05 %

Show Material materials with Titanio of 0.05 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Vanadio

0.12 %

Show Material materials with Vanadio of 0.12 %

thermomechanically rolled

EN 10113-3, EN 10025-4

Sheet, Strip, Bar, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.