Graphite XTC10

Alternative and trade names
XTC10
Want to keep this datasheet? Save it now in your required format

Description

XTC10 super fine grain graphite is an isomolded material that is processed to high density, and strength. XTC10 graphite is characterized by low, permeability, erosion resistance, surface hardness, and thermal shock resistance. It can be machined to precise tolerances and a fine surface finish.

This material data has been provided by Advanced Graphite Materials.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

23.0 °C

1.83 g/cm³

Show Supplier Material materials with Density of 1.83 g/cm³

Mechanical

PropertyTemperatureValue

Compressive strength

23.0 °C

100 MPa

Show Supplier Material materials with Compressive strength of 100 MPa

Elastic modulus

23.0 °C

11.5 GPa

Show Supplier Material materials with Elastic modulus of 11.5 GPa

Flexural strength

23.0 °C

60 MPa

Show Supplier Material materials with Flexural strength of 60 MPa

Hardness, Rockwell H

23.0 °C

70 [-]

Show Supplier Material materials with Hardness, Rockwell H of 70 [-]

Hardness, Rockwell L

23.0 °C

100 [-]

Show Supplier Material materials with Hardness, Rockwell L of 100 [-]

Tensile strength

23.0 °C

40 MPa

Show Supplier Material materials with Tensile strength of 40 MPa

Thermal

PropertyTemperatureValueComment

Ash content

23.0 °C

0.02 %

Show Supplier Material materials with Ash content of 0.02 %

Coefficient of thermal expansion

23.0 °C

3.2E-6 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 3.2E-6 1/K

average for 20-100°C

Thermal conductivity, in-plane

23.0 °C

95 W/(m·K)

Show Supplier Material materials with Thermal conductivity, in-plane of 95 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical resistivity

23.0 °C

1.3E-5 Ω·m

Show Supplier Material materials with Electrical resistivity of 1.3E-5 Ω·m

Technological properties

Property
Application areas

Continuous casting dies, Hot pressing dies and molds

Processing history

Isomolded