Kepstan® 7003

Alternative and trade names
Want to keep this datasheet? Save it now in your required format


KEPSTAN® PEKK resin is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. Its semi crystalline structure in solid state offers an outstanding combination of mechanical and thermal strength together with chemical and fire resistance.

Among the KEPSTAN® family, the 7000 Series benefits uniquely from PEKK crystalline capabilities while reducing significantly processing temperatures compared to the more crystalline 8000 Series. With a reduced melting temperature (® decreased by 25°C) and a Tg above 160°C, the KEPSTAN® 7000 Series resins are highly enabling in the field of continuous fiber composites for structural applications.

KEPSTAN® 7000 Series includes a medium flow grade, KEPSTAN® 7002, and a high flow grade, KEPSTAN® 7003, both unfilled PEKK resins designed to meet the requirements of a broad range of melt processing technologies, including among others extrusion, injection molding, fiber impregnation, consolidation and composite forming technologies.

KEPSTAN® PEKK resin is available in pellet form and in powder form with different particle sizes.Standard packaging includes 20 kg boxes for pellets and 10 kg boxes for powders.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.



PropertyValueConditionTesting Standard


1.29 g/cm³

Show Supplier Material materials with Density of 1.29 g/cm³


ISO 1183

Limiting oxygen index

35 %

Show Supplier Material materials with Limiting oxygen index of 35 %


ISO 4589-1/-2


PropertyTemperatureValueConditionTesting Standard

Elastic modulus

3.8 GPa

Show Supplier Material materials with Elastic modulus of 3.8 GPa


ISO 527-1/-2

Impact strength, Charpy notched

-30 °C

4 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 4 kJ/m²


ISO 179/1eA

23 °C

4.5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 4.5 kJ/m²


ISO 179/1eA

Impact strength, Charpy unnotched

-30 °C

18 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 18 kJ/m²


ISO 179/1eU

23 °C

22 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 22 kJ/m²


ISO 179/1eU


PropertyValueConditionTesting StandardPressure

Heat deflection temperature

172 °C

Show Supplier Material materials with Heat deflection temperature of 172 °C


ISO 75-1/-2

2 MPa


PropertyValueConditionFrequencyTesting Standard

Dielectric constant

2.6 [-]

Show Supplier Material materials with Dielectric constant of 2.6 [-]



IEC 60250

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

12 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 12 cm³/10min


ISO 1133


Technological properties

Processing methods

Injection Molding:

  • Drying temperature and time: 150°C for 3 to 4 hours or 120°C for 6 to 8 hours
  • Processing temperature: 340 – 360°C
  • Temperature settings - Injection: Rear 320°C / Center 340°C / Front 350°C / Nozzle 360°C
  • Mold temperature (to facilitate filling of the cavity and polymer crystallization): 230 - 250°C
  • Temperature settings - Extrusion Zones 1/2/3/4: 290°C/ 320°C/ 350°C/ 340°C Die: 340°C