Kynar Flex® Ultraflex B

Alternative and trade names
PVDF
Want to keep this datasheet? Save it now in your required format

Description

Kynar Flex® resins are fluorinated thermoplastic copolymers.

Kynar Ultraflex® resin is a semi-crystalline copolymer of vinylidene fluoride and hexafluoropropylene. This copolymer is a highly flexible material that can be melt processed using typical melt processing equipment or can be easily put in solution for solution coating process. It can be supplied in as pellets for melt processing or as crumb to facilitate dissolution. This is the most flexible Kynar Flex® resin grade available.

Additional characteristics:

  • High flexibility
  • Toughness
  • Weatherability
  • Solution properties

  • This material data has been provided by Arkema High Performance Polymers.

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyTemperatureValueComment

    Density

    23.0 °C

    1.77 g/cm³

    Show Supplier Material materials with Density of 1.77 g/cm³

    ISO 1183

    Limiting oxygen index

    23.0 °C

    40 %

    Show Supplier Material materials with Limiting oxygen index of 40 %

    ISO 4589-1/-2

    Water absorption

    23.0 °C

    0.03 %

    Show Supplier Material materials with Water absorption of 0.03 %

    Sim. to ISO 62

    Mechanical

    PropertyTemperatureValueComment

    Elastic modulus

    23.0 °C

    0.08 GPa

    Show Supplier Material materials with Elastic modulus of 0.08 GPa

    ISO 527-1/-2

    Elongation

    23.0 °C

    50 %

    Show Supplier Material materials with Elongation of 50 %

    min., ISO 527-1/-2, nominal

    Elongation at yield

    23.0 °C

    20 %

    Show Supplier Material materials with Elongation at yield of 20 %

    ISO 527-1/-2

    Yield strength

    23.0 °C

    5 - 6 MPa

    Show Supplier Material materials with Yield strength of 5 - 6 MPa

    ISO 527-1/-2

    Impact strength, Charpy notched

    No break @ 23°C, ISO 179/1eA

    Thermal

    PropertyValueComment

    Heat deflection temperature, 1.80 MPa

    46 °C

    Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 46 °C

    ISO 75-1/-2

    Melting point

    101 °C

    Show Supplier Material materials with Melting point of 101 °C

    ISO 11357-1/-3, 10°C/min

    Technological properties

    Property
    Application areas

    Chemical Process Industry,Tubing and Hoses