Kynar® 1000 HD

Alternative and trade names
PVDF
Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo mechanical properties.

Kynar® 1000 HD resin is a standard grade of granules for compression and transfer molding, for extrusion of thick walled parts: blocks, rods, plaques, tubes.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueTesting StandardCondition

Density

1.77 - 1.79 g/cm³

Show Supplier Material materials with Density of 1.77 - 1.79 g/cm³

ASTM D792

1.77 g/cm³

Show Supplier Material materials with Density of 1.77 g/cm³

ISO 1183

dry

Limiting oxygen index

60 %

Show Supplier Material materials with Limiting oxygen index of 60 %

ASTM D2863

83 %

Show Supplier Material materials with Limiting oxygen index of 83 %

ISO 4589-1/-2

dry

Moisture absorption

0.015 %

Show Supplier Material materials with Moisture absorption of 0.015 %

Sim. to ISO 62

Water absorption

0.01 - 0.03 %

Show Supplier Material materials with Water absorption of 0.01 - 0.03 %

ASTM D570

0.03 %

Show Supplier Material materials with Water absorption of 0.03 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueTesting StandardConditionComment

Compressive strength

68.9 - 103 MPa

Show Supplier Material materials with Compressive strength of 68.9 - 103 MPa

ASTM D695

Elastic modulus

2 GPa

Show Supplier Material materials with Elastic modulus of 2 GPa

ISO 527-1/-2

dry

Elongation

20 - 100 %

Show Supplier Material materials with Elongation of 20 - 100 %

ASTM D638

50 %

Show Supplier Material materials with Elongation of 50 %

ISO 527-1/-2

dry

min. | nominal

Elongation at yield

9 %

Show Supplier Material materials with Elongation at yield of 9 %

ISO 527-1/-2

dry

Flexural modulus

1.4 - 2.3 GPa

Show Supplier Material materials with Flexural modulus of 1.4 - 2.3 GPa

ASTM D790

Hardness, Shore D

76 - 80 [-]

Show Supplier Material materials with Hardness, Shore D of 76 - 80 [-]

ASTM D2240

Impact strength, Charpy notched

-30 °C

5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²

ISO 179/1eA

dry

23 °C

22 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 22 kJ/m²

ISO 179/1eA

dry

Impact strength, Charpy unnotched

No Break at 23 and -30°C

ISO 179/1eU

dry

Tensile strength

34.5 - 55.2 MPa

Show Supplier Material materials with Tensile strength of 34.5 - 55.2 MPa

ASTM D638

Yield strength

44.8 - 55.2 MPa

Show Supplier Material materials with Yield strength of 44.8 - 55.2 MPa

ASTM D638

Thermal

PropertyValueTesting StandardConditionPressureComment

Coefficient of thermal expansion

0.000119 - 0.000144 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.000119 - 0.000144 1/K

ASTM D696

0.00015 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.00015 1/K

ISO 11359-1/-2

dry

Glass transition temperature

-40 °C

Show Supplier Material materials with Glass transition temperature of -40 °C

ASTM D7028, ISO 11357-1/-2

dry

10°C/min

Heat deflection temperature

104 °C

Show Supplier Material materials with Heat deflection temperature of 104 °C

ISO 75-1/-2

dry

2 MPa

105 - 115 °C

Show Supplier Material materials with Heat deflection temperature of 105 - 115 °C

ASTM D648

2 MPa

248 °F/hr

125 - 140 °C

Show Supplier Material materials with Heat deflection temperature of 125 - 140 °C

ASTM D648

0.45 MPa

248 °F/hr

Melting point

169 °C

Show Supplier Material materials with Melting point of 169 °C

ISO 11357-1/-3

dry

10°C/min

172 °C

Show Supplier Material materials with Melting point of 172 °C

ASTM D3418

Relative temperature index, electrical

150 °C

Show Supplier Material materials with Relative temperature index, electrical of 150 °C

UL 746B

Relative temperature index, mechanical strength

150 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 150 °C

UL 746B

Specific heat capacity

745 - 958 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 745 - 958 J/(kg·K)

DSC

Thermal conductivity

0.17 - 0.19 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.17 - 0.19 W/(m·K)

ASTM D433

Thermal decomposition in air

375 °C

Show Supplier Material materials with Thermal decomposition in air of 375 °C

TGA

1% wt. loss

Thermal decomposition in nitrogen

410 °C

Show Supplier Material materials with Thermal decomposition in nitrogen of 410 °C

TGA

1% wt. loss

Vicat softening temperature

138 °C

Show Supplier Material materials with Vicat softening temperature of 138 °C

ISO 306

50°C/h 50N

Flammability

At thickness 1.6 mm IEC 60695-11-10: V-0, At thickness 0.8 mm IEC 60695-11-10: V-0

Electrical

PropertyValueConditionTesting StandardFrequency

Comparative tracking index

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

dry

IEC 60112

Dielectric constant

7 [-]

Show Supplier Material materials with Dielectric constant of 7 [-]

dry

IEC 60250

1MHz

10.5 [-]

Show Supplier Material materials with Dielectric constant of 10.5 [-]

dry

IEC 60250

100Hz

Dielectric strength

27 kV/mm

Show Supplier Material materials with Dielectric strength of 27 kV/mm

dry

IEC 60243-1

Dissipation factor

0.027 [-]

Show Supplier Material materials with Dissipation factor of 0.027 [-]

dry

IEC 60250

100Hz

0.24 [-]

Show Supplier Material materials with Dissipation factor of 0.24 [-]

dry

IEC 60250

1MHz

Surface resistivity

4e+13 Ω/sq

Show Supplier Material materials with Surface resistivity of 4e+13 Ω/sq

cond.

IEC 60093

Volume resistivity

2.3e+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 2.3e+12 Ω·cm

dry

IEC 60093

2e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm

65% RH

ASTM D257

Optical

PropertyValueTesting StandardComment

Refractive index

1 [-]

Show Supplier Material materials with Refractive index of 1 [-]

ASTM D542

sodium D line

Rheological Properties

PropertyValueTesting StandardConditionComment

Melt mass-flow rate

1 - 3 g/10min

Show Supplier Material materials with Melt mass-flow rate of 1 - 3 g/10min

ASTM D1238

230°C/5kg

Melt viscosity

1500 - 2000 Pa·s

Show Supplier Material materials with Melt viscosity of 1500 - 2000 Pa·s

ASTM D3835

Melt volume-flow rate

1.1 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 1.1 cm³/10min

ISO 1133

dry

230°C/5kg

Shrinkage

2 %

Show Supplier Material materials with Shrinkage of 2 %

ISO 294-4

dry

2 %

Show Supplier Material materials with Shrinkage of 2 %

ISO 294-4

dry

Transverse

Technological properties

Property
Application areas

Chemical Process Industry,Chemical Process Industry - High Purity Piping,Chemical Process Industry - Injection Molding,Chemical Process Industry - Stock Shapes,Plenum Pipe,Tubing and Hoses