Kynar® 400 HDC M800

Alternative and trade names
PVDF-I

Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Kynar® 400 HDC M800 resin is a thermoplastic fluorinated polymer. This product has been designed for Oil , Gas applications.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.73 g/cm³ Show Supplier Material materials with Density of 1.73 g/cm³	dry	ISO 1183

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		1 GPa Show Supplier Material materials with Elastic modulus of 1 GPa	dry	ISO 527-1/-2
Elongation		40 % Show Supplier Material materials with Elongation of 40 %	dry	ISO 527-1/-2	min. \| nominal
Elongation at yield		15 % Show Supplier Material materials with Elongation at yield of 15 %	dry	ISO 527-1/-2
Impact strength, Charpy notched	-30 °C	10.6 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 10.6 kJ/m²	dry	ISO 179/1eA
	23 °C	51 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 51 kJ/m²	dry	ISO 179/1eA
Impact strength, Charpy unnotched		No Break at 23 and -30°C	dry	ISO 179/1eU

Thermal

Property	Value	Condition	Testing Standard	Pressure	Comment
Coefficient of thermal expansion	0.000183 1/K Show Supplier Material materials with Coefficient of thermal expansion of 0.000183 1/K	dry	ISO 11359-1/-2
Heat deflection temperature	67 °C Show Supplier Material materials with Heat deflection temperature of 67 °C	dry	ISO 75-1/-2	2 MPa
Melting point	171 °C Show Supplier Material materials with Melting point of 171 °C	dry	ISO 11357-1/-3		10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Melt volume-flow rate	3 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 3 cm³/10min	dry	ISO 1133	230°C/10kg
Specific heat capacity melt	1600 J/(kg·K) Show Supplier Material materials with Specific heat capacity melt of 1600 J/(kg·K)
Thermal conductivity of melt	0.19 W/(m·K) Show Supplier Material materials with Thermal conductivity of melt of 0.19 W/(m·K)

Technological properties

Property

Application areas

Offshore Flexible Pipes

Processing methods

Injection Molding:

Melt temperature (°C) ISO 294: 230

Mold temperature (°C) ISO 10724: -

Injection velocity (mm/s) ISO 294: -

Pressure at hold (MPa) ISO 294: -

Kynar® 400 HDC M800

Description

Ashby charts

Applications

Materials by this supplier

Properties