Kynar® 710

Alternative and trade names
PVDF
Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® 710 resin is a grade of granules for injection molding, rotomolding applications and multifilament extrusion. This product is ANSI/NSF Standard 61 certified. A powder form is available as

Kynar® 711 resin.

This material data has been provided by Arkema High Performance Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.78 g/cm³

Show Supplier Material materials with Density of 1.78 g/cm³

ISO 1183

Limiting oxygen index

23.0 °C

43 %

Show Supplier Material materials with Limiting oxygen index of 43 %

ISO 4589-1/-2

Water absorption

23.0 °C

0.03 %

Show Supplier Material materials with Water absorption of 0.03 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.3 GPa

Show Supplier Material materials with Elastic modulus of 2.3 GPa

ISO 527-1/-2

Elongation

23.0 °C

50 %

Show Supplier Material materials with Elongation of 50 %

min., ISO 527-1/-2, nominal

Elongation at yield

23.0 °C

9 %

Show Supplier Material materials with Elongation at yield of 9 %

ISO 527-1/-2

Impact strength, Charpy notched

-30.0 °C

5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²

ISO 179/1eA

23.0 °C

8 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 8 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-30.0 °C

208 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 208 kJ/m²

ISO 179/1eU

23.0 °C

192 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 192 kJ/m²

ISO 179/1eU

Unlock all property charts

Yield strength

23.0 °C

54 MPa

Show Supplier Material materials with Yield strength of 54 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.5E-4 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.5E-4 1/K

ISO 11359-1/-2

Glass transition temperature

-40 °C

Show Supplier Material materials with Glass transition temperature of -40 °C

ISO 11357-1/-2, 10°C/min

Heat deflection temperature, 0.45 MPa

130 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 130 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

110 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 110 °C

ISO 75-1/-2

Melting point

168 °C

Show Supplier Material materials with Melting point of 168 °C

ISO 11357-1/-3, 10°C/min

Relative temperature index, electrical

150 °C

Show Supplier Material materials with Relative temperature index, electrical of 150 °C

UL 746B

Relative temperature index, mechanical strength

150 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 150 °C

UL 746B

Specific heat capacity

23.0 °C

665 - 958 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 665 - 958 J/(kg·K)

DSC

Thermal decomposition in air

375 °C

Show Supplier Material materials with Thermal decomposition in air of 375 °C

TGA, 1% wt. loss

Thermal decomposition in nitrogen

410 °C

Show Supplier Material materials with Thermal decomposition in nitrogen of 410 °C

TGA, 1% wt. loss

Vicat softening temperature

140 °C

Show Supplier Material materials with Vicat softening temperature of 140 °C

ISO 306, 50°C/h 50N

Flammability

At thickness 1.6 mm IEC 60695-11-10: V-0, At thickness 0.8 mm IEC 60695-11-10: V-0 and yellow card available

Electrical

PropertyTemperatureValueComment

Dielectric constant, 100Hz

23.0 °C

9 [-]

Show Supplier Material materials with Dielectric constant, 100Hz of 9 [-]

IEC 60250

Dielectric constant, 1MHz

23.0 °C

6 [-]

Show Supplier Material materials with Dielectric constant, 1MHz of 6 [-]

IEC 60250

Dissipation factor, 100Hz

23.0 °C

0.04 [-]

Show Supplier Material materials with Dissipation factor, 100Hz of 0.04 [-]

IEC 60250

Dissipation factor, 1MHz

23.0 °C

0.21 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 0.21 [-]

IEC 60250

Volume resistivity

23.0 °C

2.00E+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 2.00E+14 Ω·cm

IEC 60093

Rheological Properties

PropertyTemperatureValueComment

Melt volume-flow rate

20 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 20 cm³/10min

ISO 1133, 230°C/5kg

Shrinkage

23.0 °C

2 %

Show Supplier Material materials with Shrinkage of 2 %

ISO 294-4 2577

Shrinkage, transverse

23.0 °C

2 %

Show Supplier Material materials with Shrinkage, transverse of 2 %

ISO 294-4 2577

Technological properties

Property
Application areas

Main applications:

  • corrosion protection in the chemical industry
  • coating (painting, co-extrusion)
  • off shore
  • wire and cable

    or

    Chemical Process Industry,Chemical Process Industry - Injection Molding,Tower Packing,Plenum Cable

  • Processing methods

    Injection Molding:

  • Melt temperature (°C) ISO 294: 200
  • Mold temperature (°C) ISO 10724: 90
  • Injection velocity (mm/s) ISO 294: 10
  • Pressure at hold (MPa) ISO 294: 13