Kynar® ADX 111

Alternative and trade names
PVDF
Want to keep this datasheet? Save it now in your required format

Description

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® ADX 111 resin allows primer less powder coating (direct adhesion to metals after standard surface preparation.

Can be used easily in standard application processes:

  • Dip coating in fluidized bed
  • Electrostatic spraying
  • Hot flocking

  • This material data has been provided by Arkema Technical Polymers.

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyValueConditionTesting Standard

    Density

    1.78 g/cm³

    Show Supplier Material materials with Density of 1.78 g/cm³

    dry

    ISO 1183

    Limiting oxygen index

    44 %

    Show Supplier Material materials with Limiting oxygen index of 44 %

    dry

    ISO 4589-1/-2

    Moisture absorption

    0.07 %

    Show Supplier Material materials with Moisture absorption of 0.07 %

    Sim. to ISO 62

    Water absorption

    0.1 %

    Show Supplier Material materials with Water absorption of 0.1 %

    Sim. to ISO 62

    Mechanical

    PropertyValueConditionTesting StandardComment

    Elastic modulus

    2.2 GPa

    Show Supplier Material materials with Elastic modulus of 2.2 GPa

    dry

    ISO 527-1/-2

    Elongation

    50 %

    Show Supplier Material materials with Elongation of 50 %

    dry

    ISO 527-1/-2

    min. | nominal

    Elongation at yield

    8 %

    Show Supplier Material materials with Elongation at yield of 8 %

    dry

    ISO 527-1/-2

    Yield strength

    52 MPa

    Show Supplier Material materials with Yield strength of 52 MPa

    dry

    ISO 527-1/-2

    Thermal

    PropertyValueConditionTesting StandardPressureComment

    Coefficient of thermal expansion

    0.00015 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 0.00015 1/K

    dry

    ISO 11359-1/-2

    Glass transition temperature

    -40 °C

    Show Supplier Material materials with Glass transition temperature of -40 °C

    dry

    ISO 11357-1/-2

    10°C/min

    Heat deflection temperature

    110 °C

    Show Supplier Material materials with Heat deflection temperature of 110 °C

    dry

    ISO 75-1/-2

    2 MPa

    132 °C

    Show Supplier Material materials with Heat deflection temperature of 132 °C

    dry

    ISO 75-1/-2

    0.45 MPa

    Melting point

    169 °C

    Show Supplier Material materials with Melting point of 169 °C

    dry

    ISO 11357-1/-3

    10°C/min

    Vicat softening temperature

    139 °C

    Show Supplier Material materials with Vicat softening temperature of 139 °C

    ISO 306

    50°C/h 50N

    Flammability

    At thickness 1.5 mm IEC 60695-11-10: V-0, At thickness 0.8 mm IEC 60695-11-10: V-0

    Electrical

    PropertyValueConditionTesting StandardFrequencyComment

    Comparative tracking index

    600 V

    Show Supplier Material materials with Comparative tracking index of 600 V

    dry

    IEC 60112

    Dielectric constant

    7 [-]

    Show Supplier Material materials with Dielectric constant of 7 [-]

    dry

    IEC 60250

    1MHz

    9 [-]

    Show Supplier Material materials with Dielectric constant of 9 [-]

    dry

    IEC 60250

    100Hz

    Dielectric strength

    21 kV/mm

    Show Supplier Material materials with Dielectric strength of 21 kV/mm

    dry

    IEC 60243-1

    Dissipation factor

    0.032 [-]

    Show Supplier Material materials with Dissipation factor of 0.032 [-]

    dry

    IEC 60250

    100Hz

    0.214 [-]

    Show Supplier Material materials with Dissipation factor of 0.214 [-]

    dry

    IEC 60250

    1MHz

    Surface resistivity

    1e+15 Ω/sq

    Show Supplier Material materials with Surface resistivity of 1e+15 Ω/sq

    cond.

    IEC 60093

    min.

    Volume resistivity

    2e+14 Ω·cm

    Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm

    dry

    IEC 60093

    Rheological Properties

    PropertyValueConditionTesting StandardComment

    Melt volume-flow rate

    27 cm³/10min

    Show Supplier Material materials with Melt volume-flow rate of 27 cm³/10min

    dry

    ISO 1133

    230°C/3.8kg

    Technological properties

    Property
    Application areas

    Metal Tube Coating