Kynar® Film 302 PGM TR

Alternative and trade names
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar® film 302 PGM TR is a flexible thermoplastic fluorinated film. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. These films are specially designed for photovoltaic applications.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.4 g/cm³ Show Supplier Material materials with Density of 1.4 g/cm³	dry	ISO 1183
Moisture absorption	0.2 % Show Supplier Material materials with Moisture absorption of 0.2 %		Sim. to ISO 62

Mechanical

Property	Value	Condition	Testing Standard	Comment
Elongation	50 % Show Supplier Material materials with Elongation of 50 %	dry	ISO 527-3	Transverse
	100 % Show Supplier Material materials with Elongation of 100 %	dry	ISO 527-3
Elongation at yield	11 % Show Supplier Material materials with Elongation at yield of 11 %	dry	ISO 527-3
Elongation at yield, transverse	11 % Show Supplier Material materials with Elongation at yield, transverse of 11 %	dry	ISO 527-3
Tear strength	2 kN/m Show Supplier Material materials with Tear strength of 2 kN/m		ISO 6383-1
	3 kN/m Show Supplier Material materials with Tear strength of 3 kN/m		ISO 6383-1	Transverse
Tensile strength	30 MPa Show Supplier Material materials with Tensile strength of 30 MPa	dry	ISO 527-3	Transverse
	30 MPa Show Supplier Material materials with Tensile strength of 30 MPa	dry	ISO 527-3

Electrical

Property	Value	Condition	Testing Standard
Dielectric strength	110 kV/mm Show Supplier Material materials with Dielectric strength of 110 kV/mm	dry	IEC 60243-1

Technological properties

Property
Application areas	Photovoltaic / Solar Film

Kynar® Film 302 PGM TR

Description

Ashby charts

Applications

Materials by this supplier

Properties