Orgalloy® LT 4060 ES BLACK T6L

Alternative and trade names
PA6
Want to keep this datasheet? Save it now in your required format

Description

Orgalloy® LT 4060 ES BLACK T6L resin is a polyamide alloy especially designed for extrusion blow molding. This black grade offers an excellent thermal resistance, cold impact performance and flexibility.

This material data has been provided by Arkema High Performance Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Supplier Material materials with Density of 1.04 g/cm³

ISO 1183

Moisture absorption

23.0 °C

1.1 %

Show Supplier Material materials with Moisture absorption of 1.1 %

Sim. to ISO 62

Water absorption

23.0 °C

5 %

Show Supplier Material materials with Water absorption of 5 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

0.57 GPa

Show Supplier Material materials with Elastic modulus of 0.57 GPa

ISO 527-1/-2

Elongation

23.0 °C

50 %

Show Supplier Material materials with Elongation of 50 %

min., ISO 527-1/-2

Hardness, Shore D

23.0 °C

50 [-]

Show Supplier Material materials with Hardness, Shore D of 50 [-]

ISO 7619-1, 15 seconds

Impact strength, Charpy notched

23.0 °C

79 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 79 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

No break @ 23°C, ISO 179/1eU

Thermal

PropertyValueComment

Heat deflection temperature, 0.45 MPa

60 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 60 °C

ISO 75-1/-2

Melting point

220 °C

Show Supplier Material materials with Melting point of 220 °C

ISO 11357-1/-3, 10°C/min

Vicat softening temperature

62 °C

Show Supplier Material materials with Vicat softening temperature of 62 °C

ISO 306, 50°C/h 50N

Flammability

At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

IEC 60112, Conditioned

Rheological Properties

PropertyValueComment

Melt volume-flow rate

0.5 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 0.5 cm³/10min

ISO 1133, 235°C/5kg

Technological properties

Property
Application areas

Main applications:

  • Automotive air intake ducts (clean air duct and outside intercooler tube)

    or

    Fluid Management - Air Intake Circuit

  • Other

    Packaging:

  • This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

    Shelf life:

  • Two years from the date of delivery. For any use above this limit, please refer to our technical services.

  • Processing methods

    Injection Molding:

  • Melt temperature (°C) ISO 294: 260
  • Mold temperature (°C) ISO 10724: 60
  • Injection velocity (mm/s) ISO 294: -
  • Pressure at hold (MPa) ISO 294: -

  • Blow Molding:

  • Drying time (only necessary for bags opened for more than two hours): 4-8 hours at 80°C
  • Extrusion melt temperature (min-recommended-max): 250-260-270°C