Orgalloy® LT 5050 T6L NAT

Alternative and trade names
PA6
Want to keep this datasheet? Save it now in your required format

Description

Orgalloy® LT 5050 T6L NAT resin is a polyamide alloy especially designed for tube extrusion. This natural grade dedicated to extrusion offers good barrier properties and chemical resistance to oils and HFC gas, a high thermal resistance and flexibility.

This material data has been provided by Arkema High Performance Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Supplier Material materials with Density of 1.04 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

0.5 GPa

Show Supplier Material materials with Elastic modulus of 0.5 GPa

ISO 527-1/-2, Conditioned

Elongation

23.0 °C

50 %

Show Supplier Material materials with Elongation of 50 %

min., ISO 527-1/-2, Conditioned

Hardness, Shore D

23.0 °C

55 [-]

Show Supplier Material materials with Hardness, Shore D of 55 [-]

ISO 7619-1, 15 seconds

Impact strength, Charpy notched

23.0 °C

75 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 75 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

No break @ 23°C, ISO 179/1eU

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.7E-4 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.7E-4 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

1.8E-4 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 1.8E-4 1/K

ISO 11359-1/-2

Melting point

220 °C

Show Supplier Material materials with Melting point of 220 °C

ISO 11357-1/-3, 10°C/min

Vicat softening temperature

75 °C

Show Supplier Material materials with Vicat softening temperature of 75 °C

ISO 306, 50°C/h 50N

Flammability

At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

IEC 60112, Conditioned

Dielectric constant, 100Hz

23.0 °C

4 [-]

Show Supplier Material materials with Dielectric constant, 100Hz of 4 [-]

IEC 60250, Conditioned

Dielectric constant, 1MHz

23.0 °C

4 [-]

Show Supplier Material materials with Dielectric constant, 1MHz of 4 [-]

IEC 60250, Conditioned

Dielectric strength

23.0 °C

36 kV/mm

Show Supplier Material materials with Dielectric strength of 36 kV/mm

IEC 60243-1

Dissipation factor, 100Hz

23.0 °C

0.11 [-]

Show Supplier Material materials with Dissipation factor, 100Hz of 0.11 [-]

IEC 60250, Conditioned

Dissipation factor, 1MHz

23.0 °C

0.05 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 0.05 [-]

IEC 60250, Conditioned

Volume resistivity

23.0 °C

7.50E+11 Ω·cm

Show Supplier Material materials with Volume resistivity of 7.50E+11 Ω·cm

IEC 60093, Conditioned

Rheological Properties

PropertyValueComment

Melt volume-flow rate

2.5 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 2.5 cm³/10min

ISO 1133, 235°C/5kg

Technological properties

Property
Application areas

Main applications:

  • Barrier layer for air conditionning hoses
  • Barrier layer for LPG lines

    or

    Alternative Fuel Systems - CNG, LPG, LNG Lines and Tanks,Auto - Water Cooling Circuit,Fluid Management - Air Conditioning Circuit,Fluid Management - Brakebooster Lines,Tubing and Hoses

  • Other

    Packaging:

  • This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

    Shelf life:

  • Two years from the date of delivery. For any use above this limit, please refer to our technical services.

  • Processing methods

    Injection Molding:

  • Melt temperature (°C) ISO 294: 260
  • Mold temperature (°C) ISO 10724: 60
  • Injection velocity (mm/s) ISO 294: -
  • Pressure at hold (MPa) ISO 294: -