General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Abrasion resistance | 130 mm³ Show Supplier Material materials with Abrasion resistance of 130 mm³ | dry | ISO 4649 |
Density | 1 g/cm³ Show Supplier Material materials with Density of 1 g/cm³ | dry | ISO 1183 |
Moisture absorption | 0.4 % Show Supplier Material materials with Moisture absorption of 0.4 % | Sim. to ISO 62 | |
Water absorption | 1.2 % Show Supplier Material materials with Water absorption of 1.2 % | Sim. to ISO 62 |
Mechanical
Property | Value | Testing Standard | Condition | Comment |
---|---|---|---|---|
Compression set | 19 [-] Show Supplier Material materials with Compression set of 19 [-] | ISO 815 | for 24h | |
Elastic modulus | 0.01 GPa Show Supplier Material materials with Elastic modulus of 0.01 GPa | ISO 527-1/-2 | cond. | |
0.012 GPa Show Supplier Material materials with Elastic modulus of 0.012 GPa | ISO 527-1/-2 | dry | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | ISO 527-1/-2 | cond., dry | min. |
Hardness, Shore A | 77 [-] Show Supplier Material materials with Hardness, Shore A of 77 [-] | ISO 7619-1 | for 3 seconds | |
Hardness, Shore D | 22 [-] Show Supplier Material materials with Hardness, Shore D of 22 [-] | ISO 7619-1 | dry | 15 seconds |
Impact strength, Charpy notched | No Break at 23 and -30°C | ISO 179/1eA | dry and cond. | |
Impact strength, Charpy unnotched | No Break at 23 and -30°C | ISO 179/1eU | dry and cond. | |
Tear strength | 44 kN/m Show Supplier Material materials with Tear strength of 44 kN/m | ISO 34-1 |
Thermal
Property | Value | Condition | Testing Standard | Comment | |||
---|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 0.0002 1/K Show Supplier Material materials with Coefficient of thermal expansion of 0.0002 1/K | dry | ISO 11359-1/-2 | ||||
Glass transition temperature | -65 °C Show Supplier Material materials with Glass transition temperature of -65 °C | dry | ISO 11357-1/-2 | 10°C/min | |||
Melting point | 134 °C Show Supplier Material materials with Melting point of 134 °C | dry | ISO 11357-1/-3 | 10°C/min | |||
Vicat softening temperature | 58 °C Show Supplier Material materials with Vicat softening temperature of 58 °C | ISO 306 | 50°C/h 50N | ||||
Flammability | At thickness 1.6 mm IEC 60695-11-10: HB and yellow card available |
Electrical
Property | Value | Condition | Testing Standard | Frequency |
---|---|---|---|---|
Comparative tracking index | 600 V Show Supplier Material materials with Comparative tracking index of 600 V | cond. | IEC 60112 | |
Dielectric constant | 6 [-] Show Supplier Material materials with Dielectric constant of 6 [-] | dry | IEC 60250 | 100Hz |
6 [-] Show Supplier Material materials with Dielectric constant of 6 [-] | dry | IEC 60250 | 1MHz | |
Dielectric strength | 36 kV/mm Show Supplier Material materials with Dielectric strength of 36 kV/mm | dry | IEC 60243-1 | |
Dissipation factor | 0.0378 [-] Show Supplier Material materials with Dissipation factor of 0.0378 [-] | dry | IEC 60250 | 1MHz |
0.0552 [-] Show Supplier Material materials with Dissipation factor of 0.0552 [-] | dry | IEC 60250 | 100Hz | |
Surface resistivity | 3e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 3e+12 Ω/sq | cond. | IEC 60093 | |
Volume resistivity | 1.3e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1.3e+12 Ω·cm | dry | IEC 60093 |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Density of melt | 0.83 g/cm³ Show Supplier Material materials with Density of melt of 0.83 g/cm³ | |||
Shrinkage | 0.5 % Show Supplier Material materials with Shrinkage of 0.5 % | dry | ISO 294-4 | |
0.8 % Show Supplier Material materials with Shrinkage of 0.8 % | dry | ISO 294-4 | Transverse | |
Specific heat capacity melt | 2800 J/(kg·K) Show Supplier Material materials with Specific heat capacity melt of 2800 J/(kg·K) | |||
Thermal conductivity of melt | 0.18 W/(m·K) Show Supplier Material materials with Thermal conductivity of melt of 0.18 W/(m·K) |
Technological properties
Property | ||
---|---|---|
Application areas | Conveyor Belts and Pulleys,Footwear - Midsoles / Foam,Footwear - Outsoles,Ski Boots,Sports Equipment | |
Certifications | Yellow Card | |
Processing methods | Injection Molding: |