Pebax® 5533 SN 70 BLACK

Alternative and trade names
TPA-CD
Want to keep this datasheet? Save it now in your required format

Description

Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SN 70 grade is made conductive thanks to carbon black.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Density

1.09 g/cm³

Show Supplier Material materials with Density of 1.09 g/cm³

dry

ISO 1183

Moisture absorption

0.5 %

Show Supplier Material materials with Moisture absorption of 0.5 %

Sim. to ISO 62

Water absorption

1.2 %

Show Supplier Material materials with Water absorption of 1.2 %

Sim. to ISO 62

Mechanical

PropertyValueConditionTesting StandardComment

Elastic modulus

0.298 GPa

Show Supplier Material materials with Elastic modulus of 0.298 GPa

cond.

ISO 527-1/-2

0.305 GPa

Show Supplier Material materials with Elastic modulus of 0.305 GPa

dry

ISO 527-1/-2

Elongation

50 %

Show Supplier Material materials with Elongation of 50 %

cond., dry

ISO 527-1/-2

min. | nominal

Elongation at yield

31 %

Show Supplier Material materials with Elongation at yield of 31 %

dry

ISO 527-1/-2

36 %

Show Supplier Material materials with Elongation at yield of 36 %

cond.

ISO 527-1/-2

Hardness, Shore D

60 [-]

Show Supplier Material materials with Hardness, Shore D of 60 [-]

dry

ISO 7619-1

15 seconds

Impact strength, Charpy notched

No Break at 23°C

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23 and -30°C

cond.

ISO 179/1eU

Yield strength

12 MPa

Show Supplier Material materials with Yield strength of 12 MPa

cond.

ISO 527-1/-2

19 MPa

Show Supplier Material materials with Yield strength of 19 MPa

dry

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Coefficient of thermal expansion

0.00022 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.00022 1/K

dry

ISO 11359-1/-2

Melting point

159 °C

Show Supplier Material materials with Melting point of 159 °C

dry

ISO 11357-1/-3

10°C/min

Flammability

At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB

Electrical

PropertyValueConditionTesting Standard

Surface resistivity

5500 Ω/sq

Show Supplier Material materials with Surface resistivity of 5500 Ω/sq

cond.

IEC 60093

Volume resistivity

1.1e+07 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.1e+07 Ω·cm

dry

IEC 60093

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

5 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 5 cm³/10min

dry

ISO 1133

250°C/5kg

Technological properties

Property
Application areas

Alternative Fuel Systems - CNG, LPG, LNG Lines and Tanks,Underground Fuel Containment

Fillers

Carbon Black

Processing methods

Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
  • Typical mold temperature : 25 – 60°C.
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.


    Extrusion:

  • Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.