General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Density | 1.01 g/cm³ Show Supplier Material materials with Density of 1.01 g/cm³ | dry | ISO 1183 |
Moisture absorption | 0.7 % Show Supplier Material materials with Moisture absorption of 0.7 % | Sim. to ISO 62 | |
Water absorption | 1.1 % Show Supplier Material materials with Water absorption of 1.1 % | Sim. to ISO 62 |
Mechanical
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Elastic modulus | 0.285 GPa Show Supplier Material materials with Elastic modulus of 0.285 GPa | cond. | ISO 527-1/-2 | |
0.307 GPa Show Supplier Material materials with Elastic modulus of 0.307 GPa | dry | ISO 527-1/-2 | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | cond., dry | ISO 527-1/-2 | min. | nominal |
Elongation at yield | 22 % Show Supplier Material materials with Elongation at yield of 22 % | cond., dry | ISO 527-1/-2 | |
Hardness, Shore D | 58 [-] Show Supplier Material materials with Hardness, Shore D of 58 [-] | dry | ISO 7619-1 | 15 seconds |
Impact strength, Charpy unnotched | No Break at 23 and -30°C | cond. | ISO 179/1eU | |
Yield strength | 18 MPa Show Supplier Material materials with Yield strength of 18 MPa | cond. | ISO 527-1/-2 | |
23 MPa Show Supplier Material materials with Yield strength of 23 MPa | dry | ISO 527-1/-2 |
Thermal
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Healthcare-Other,IV Bags,Medical Catheters | |
Certifications | USP Class VI | |
Processing methods | Injection Molding: Extrusion: |