Pebax® Rnew® 35R53 SP 01

Alternative and trade names
TPA
Want to keep this datasheet? Save it now in your required format

Description

Polyether block Pebax® Rnew® 35R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon according to ASTM D6866 is 28-32%.

This material data has been provided by Arkema High Performance Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Bio-based content

28 - 32 %

Show Supplier Material materials with Bio-based content of 28 - 32 %

ASTM D6866

Density

23.0 °C

1.02 g/cm³

Show Supplier Material materials with Density of 1.02 g/cm³

ISO 1183

Moisture absorption

23.0 °C

0.5 %

Show Supplier Material materials with Moisture absorption of 0.5 %

Sim. to ISO 62

Water absorption

23.0 °C

1.3 %

Show Supplier Material materials with Water absorption of 1.3 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

0.04 GPa

Show Supplier Material materials with Elastic modulus of 0.04 GPa

ISO 527-1/-2, Conditioned

Hardness, Shore D

23.0 °C

25 [-]

Show Supplier Material materials with Hardness, Shore D of 25 [-]

ISO 7619-1, 15 seconds

Impact strength, Charpy notched

No break @ 23,-30°C, ISO 179/1eA

Impact strength, Charpy unnotched

No break @ 23,-30°C, ISO 179/1eU

Thermal

PropertyValueComment

Melting point

135 °C

Show Supplier Material materials with Melting point of 135 °C

ISO 11357-1/-3, 10°C/min

Vicat softening temperature

81 °C

Show Supplier Material materials with Vicat softening temperature of 81 °C

ISO 306, 50°C/h 50N

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.6 %

Show Supplier Material materials with Shrinkage of 0.6 %

ISO 294-4 2577

Shrinkage, transverse

23.0 °C

0.6 %

Show Supplier Material materials with Shrinkage, transverse of 0.6 %

ISO 294-4 2577

Technological properties

Property
Application areas

Main applications:

  • Flexible injected parts

    or

    Breathable Films - Housewrap,Permanent Antistatic Solutions,Eyewear Frames,Footwear - Midsoles / Foam

  • Other

    Packaging:

  • This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

    Shelf life:

  • Two years from the delivery. For any use above this limit, please refer to our technical services.

  • Processing methods

    Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 260°C.
  • Typical mold temperature : 10 – 30°C.
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.


    Extrusion:

  • Typical melt temperature (Min / Recommended / Max): 190°C / 205°C / 220°C.
  • Drying time and temperature (only necessary for bags opened for more than two hours): 4-8 hours at 55-65°C.