Rilsamid® AESN BLACK P201 TL

Alternative and trade names
Want to keep this datasheet? Save it now in your required format


PA12- HIP, EHL, 22-007

Rilsamid® AESN BLACK P201 TL resin is a black colored polyamide 12. This grade is plasticized and designed for tube extrusion.

Rilsamid® AESN BLACK P201 TL resin falls into the PA12-PHLY category according to DIN 73378.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.



PropertyValueConditionTesting Standard


1.01 g/cm³

Show Supplier Material materials with Density of 1.01 g/cm³


ISO 1183


PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

0.54 GPa

Show Supplier Material materials with Elastic modulus of 0.54 GPa


ISO 527-1/-2


50 %

Show Supplier Material materials with Elongation of 50 %


ISO 527-1/-2

min. | nominal

Elongation at yield

22 %

Show Supplier Material materials with Elongation at yield of 22 %


ISO 527-1/-2

Hardness, Shore D

64 [-]

Show Supplier Material materials with Hardness, Shore D of 64 [-]


ISO 7619-1

15 seconds

Impact strength, Charpy notched

-30 °C

7 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 7 kJ/m²


ISO 179/1eA

No Break at 23°C

Impact strength, Charpy unnotched

No Break at 23 and -30°C


ISO 179/1eU


PropertyValueConditionTesting StandardComment

Melting point

176 °C

Show Supplier Material materials with Melting point of 176 °C


ISO 11357-1/-3


Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

5 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 5 cm³/10min


ISO 1133


Technological properties

Application areas

Air Brake Tubing,Auto - Water Cooling Circuit,Fuel Management - Fuel Lines,Tubing and Hoses

Processing methods

Injection Molding:

  • Melt temperature (°C) ISO 294: 270
  • Mold temperature (°C) ISO 10724: 50
  • Injection velocity (mm/s) ISO 294: -
  • Pressure at hold (MPa) ISO 294: 16

  • Extrusion:

  • Typical melt temperature: (Min / Recommended / Max): 230°C / 250 °C / 270 °C
  • Drying time and temperature (only necessary if containers opened for more than two hours): 4 - 6 hours at 80°C