General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Density | 1.03 g/cm³ Show Supplier Material materials with Density of 1.03 g/cm³ | dry | ISO 1183 |
Mechanical
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Elastic modulus | 0.445 GPa Show Supplier Material materials with Elastic modulus of 0.445 GPa | dry | ISO 527-1/-2 | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | dry | ISO 527-1/-2 | min. | nominal | |
Elongation at yield | 27 % Show Supplier Material materials with Elongation at yield of 27 % | dry | ISO 527-1/-2 | ||
Hardness, Shore D | 62 [-] Show Supplier Material materials with Hardness, Shore D of 62 [-] | dry | ISO 7619-1 | 15 seconds | |
Impact strength, Charpy notched | -30 °C | 5 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m² | dry | ISO 179/1eA | No Break at 23°C |
Impact strength, Charpy unnotched | No Break at 23 and -30°C | dry | ISO 179/1eU |
Thermal
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melting point | 174 °C Show Supplier Material materials with Melting point of 174 °C | dry | ISO 11357-1/-3 | 10°C/min |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melt volume-flow rate | 10 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 10 cm³/10min | dry | ISO 1133 | 235°C/5kg |
Technological properties
Property | ||
---|---|---|
Application areas | Fluid Management - Brakebooster Lines,Fuel Management - Fuel Lines,Fuel Management - In-Tank and Fuel Venting Lines,Pneumatic Tubing,Tubing and Hoses,Underground Fuel Containment |