Rilsamid® AESNO MED

Alternative and trade names
PA12
Want to keep this datasheet? Save it now in your required format

Description

Rilsamid® AESNO MED is a rigid polyamide 12 with high viscosity designed for tube extrusion. This grade, dedicated to extrusion, offers the highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request letters regarding USP Class VI compliance can be provided.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Density

1.01 g/cm³

Show Supplier Material materials with Density of 1.01 g/cm³

dry

ISO 1183

Water absorption

1.6 %

Show Supplier Material materials with Water absorption of 1.6 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

1.4 GPa

Show Supplier Material materials with Elastic modulus of 1.4 GPa

cond.

ISO 527-1/-2

1.5 GPa

Show Supplier Material materials with Elastic modulus of 1.5 GPa

dry

ISO 527-1/-2

Elongation

50 %

Show Supplier Material materials with Elongation of 50 %

cond., dry

ISO 527-1/-2

min. | nominal

Elongation at yield

5 %

Show Supplier Material materials with Elongation at yield of 5 %

cond., dry

ISO 527-1/-2

Impact strength, Charpy notched

-30 °C

6 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 6 kJ/m²

cond.

ISO 179/1eA

23 °C

11 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23 and -30°C

cond.

ISO 179/1eU

Puncture energy

-30 °C

60 J

Show Supplier Material materials with Puncture energy of 60 J

cond.

ISO 6603-2

Puncture force

-30 °C

4800 N

Show Supplier Material materials with Puncture force of 4800 N

cond.

ISO 6603-2

Yield strength

31 MPa

Show Supplier Material materials with Yield strength of 31 MPa

cond.

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Coefficient of thermal expansion

0.0001 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0001 1/K

dry

ISO 11359-1/-2

Melting point

180 °C

Show Supplier Material materials with Melting point of 180 °C

dry

ISO 11357-1/-3

10°C/min

Vicat softening temperature

142 °C

Show Supplier Material materials with Vicat softening temperature of 142 °C

ISO 306

50°C/h 50N

Electrical

PropertyValueConditionTesting Standard

Comparative tracking index

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

cond.

IEC 60112

Dielectric strength

30 kV/mm

Show Supplier Material materials with Dielectric strength of 30 kV/mm

cond.

IEC 60243-1

Surface resistivity

1e+14 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq

cond.

IEC 60093

Volume resistivity

1e+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm

cond.

IEC 60093

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

8 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 8 cm³/10min

dry

ISO 1133

235°C/5kg

Technological properties

Property
Application areas

Tubing and Hoses,Healthcare-Other,Medical Catheters

Certifications

USP Class VI