Rilsamid® AESNO P401

Alternative and trade names
PA12

Want to keep this datasheet? Save it now in your required format

Description

Rilsamid® AESNO P401 TL resin is a natural polyamide. This grade is plasticized and designed for tube extrusion.

Rilsamid® AESNO P401 TL resin falls into the PA12-HIPHL category according to DIN 73378.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.03 g/cm³ Show Supplier Material materials with Density of 1.03 g/cm³	dry	ISO 1183
Water absorption	1.2 % Show Supplier Material materials with Water absorption of 1.2 %		Sim. to ISO 62

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		0.36 GPa Show Supplier Material materials with Elastic modulus of 0.36 GPa	cond.	ISO 527-1/-2
Elongation		50 % Show Supplier Material materials with Elongation of 50 %	cond.	ISO 527-1/-2	min.
Impact strength, Charpy notched	-30 °C	4 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 4 kJ/m²	dry	ISO 179/1eA
	-30 °C	8 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 8 kJ/m²	cond.	ISO 179/1eA	No Break at 23°C
	23 °C	46 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 46 kJ/m²	dry	ISO 179/1eA
Impact strength, Charpy unnotched		No Break at 23 and -30°C	dry and cond.	ISO 179/1eU
Yield strength		50 MPa Show Supplier Material materials with Yield strength of 50 MPa	dry	ISO 527-1/-2

Thermal

Property	Value	Condition	Testing Standard	Comment
Melting point	174 °C Show Supplier Material materials with Melting point of 174 °C	dry	ISO 11357-1/-3	10°C/min

Electrical

Property	Value	Condition	Testing Standard
Comparative tracking index	600 V Show Supplier Material materials with Comparative tracking index of 600 V	dry	IEC 60112
Dielectric strength	41 kV/mm Show Supplier Material materials with Dielectric strength of 41 kV/mm	dry	IEC 60243-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Melt volume-flow rate	13 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 13 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Processing methods

Injection Molding:

Melt temperature (°C) ISO 294: 270

Mold temperature (°C) ISO 10724: 50

Injection velocity (mm/s) ISO 294: -

Pressure at hold (MPa) ISO 294: 16

Rilsamid® AESNO P401

Description

Ashby charts

Materials by this supplier

Properties