Rilsamid® AMNO MED

Alternative and trade names
PA12
Want to keep this datasheet? Save it now in your required format

Description

Rilsamid® AMNO MED is a thermoplastic polyamide 12. This grade dedicated to injection offers highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request letters regarding USP Class VI compliance can be provided.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Density

1.01 g/cm³

Show Supplier Material materials with Density of 1.01 g/cm³

dry

ISO 1183

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

1.1 GPa

Show Supplier Material materials with Elastic modulus of 1.1 GPa

cond.

ISO 527-1/-2

Elongation

50 %

Show Supplier Material materials with Elongation of 50 %

cond.

ISO 527-1/-2

min. | nominal

Elongation at yield

8 %

Show Supplier Material materials with Elongation at yield of 8 %

cond.

ISO 527-1/-2

Impact strength, Charpy notched

-30 °C

6 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 6 kJ/m²

cond.

ISO 179/1eA

23 °C

5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23 and -30°C

cond.

ISO 179/1eU

Yield strength

26 MPa

Show Supplier Material materials with Yield strength of 26 MPa

dry

ISO 527-1/-2

30 MPa

Show Supplier Material materials with Yield strength of 30 MPa

cond.

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Melting point

180 °C

Show Supplier Material materials with Melting point of 180 °C

dry

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

57 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 57 cm³/10min

dry

ISO 1133

235°C/2.16kg

Technological properties

Property
Application areas

Healthcare-Other,Medical Catheters

Certifications

USP Class VI

Processing methods

Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.
  • Mold temperature : 40°C
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 60-80°C.