Rilsamid® AMNO TLD

Alternative and trade names
PA12
Want to keep this datasheet? Save it now in your required format

Description

PA12, MHLR, 12-010

Rilsamid® AMNO TLD resin is a natural polyamide. This grade is designed for injection molding.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Density

1.02 g/cm³

Show Supplier Material materials with Density of 1.02 g/cm³

dry

ISO 1183

Limiting oxygen index

22 %

Show Supplier Material materials with Limiting oxygen index of 22 %

dry

ISO 4589-1/-2

Moisture absorption

0.7 %

Show Supplier Material materials with Moisture absorption of 0.7 %

Sim. to ISO 62

Water absorption

1.8 %

Show Supplier Material materials with Water absorption of 1.8 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

1.2 GPa

Show Supplier Material materials with Elastic modulus of 1.2 GPa

cond.

ISO 527-1/-2

1.4 GPa

Show Supplier Material materials with Elastic modulus of 1.4 GPa

dry

ISO 527-1/-2

Elongation

50 %

Show Supplier Material materials with Elongation of 50 %

cond., dry

ISO 527-1/-2

min. | nominal

Elongation at yield

7 %

Show Supplier Material materials with Elongation at yield of 7 %

cond., dry

ISO 527-1/-2

Impact strength, Charpy notched

-30 °C

5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²

cond.

ISO 179/1eA

23 °C

9 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 9 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23 and -30°C

cond.

ISO 179/1eU

Yield strength

42 MPa

Show Supplier Material materials with Yield strength of 42 MPa

cond.

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Coefficient of thermal expansion

0.00013 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.00013 1/K

dry

ISO 11359-1/-2

Melting point

178 °C

Show Supplier Material materials with Melting point of 178 °C

dry

ISO 11357-1/-3

10°C/min

Vicat softening temperature

142 °C

Show Supplier Material materials with Vicat softening temperature of 142 °C

ISO 306

50°C/h 50N

Flammability

At thickness 1.5 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: V-2 and yellow card available

Electrical

PropertyValueConditionTesting StandardFrequency

Comparative tracking index

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

cond.

IEC 60112

Dielectric constant

3 [-]

Show Supplier Material materials with Dielectric constant of 3 [-]

dry

IEC 60250

1MHz

4 [-]

Show Supplier Material materials with Dielectric constant of 4 [-]

dry

IEC 60250

100Hz

Dielectric strength

30 kV/mm

Show Supplier Material materials with Dielectric strength of 30 kV/mm

cond.

IEC 60243-1

Dissipation factor

0.029 [-]

Show Supplier Material materials with Dissipation factor of 0.029 [-]

dry

IEC 60250

1MHz

0.0779 [-]

Show Supplier Material materials with Dissipation factor of 0.0779 [-]

dry

IEC 60250

100Hz

Surface resistivity

1e+14 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq

cond.

IEC 60093

Volume resistivity

1e+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm

cond.

IEC 60093

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

57 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 57 cm³/10min

dry

ISO 1133

235°C/2.16kg

Shrinkage

0.8 %

Show Supplier Material materials with Shrinkage of 0.8 %

dry

ISO 294-4

0.8 %

Show Supplier Material materials with Shrinkage of 0.8 %

dry

ISO 294-4

Transverse

Technological properties

Property
Application areas

Connectors,Monofilaments,Tubing and Hoses

Certifications

Yellow Card

Processing methods

Injection Molding:

  • Melt temperature (°C) ISO 294: 260
  • Mold temperature (°C) ISO 10724: 50
  • Injection velocity (mm/s) ISO 294: -
  • Pressure at hold (MPa) ISO 294: 16