Rilsamid® AZM 30 O TLD

Alternative and trade names
PA12-GF30

Want to keep this datasheet? Save it now in your required format

Description

PA12, MHLR, 14-070, GF 30

Rilsamid® AZM 30 O TLD resin is a fiberglass reinforced polyamide. This natural grade is designed for injection moulding. This grade is also available in green (Rilsamid® AZM 30 Green 56827 TLD resin) and grey (Rilsamid® AZM 30 Grey 632 TLD resin). (norme ISO 19396-1/2015)

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.23 g/cm³ Show Supplier Material materials with Density of 1.23 g/cm³	dry	ISO 1183
Moisture absorption	0.6 % Show Supplier Material materials with Moisture absorption of 0.6 %		Sim. to ISO 62
Water absorption	1.2 % Show Supplier Material materials with Water absorption of 1.2 %		Sim. to ISO 62

Mechanical

Property	Temperature	Value	Condition	Testing Standard
Elastic modulus		6.5 GPa Show Supplier Material materials with Elastic modulus of 6.5 GPa	cond.	ISO 527-1/-2
		6.9 GPa Show Supplier Material materials with Elastic modulus of 6.9 GPa	dry	ISO 527-1/-2
Elongation		5 % Show Supplier Material materials with Elongation of 5 %	dry	ISO 527-1/-2
		6 % Show Supplier Material materials with Elongation of 6 %	cond.	ISO 527-1/-2
Elongation at yield		4 % Show Supplier Material materials with Elongation at yield of 4 %	cond., dry	ISO 527-1/-2
Impact strength, Charpy notched	-30 °C	15 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 15 kJ/m²	dry	ISO 179/1eA
	-30 °C	16 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 16 kJ/m²	cond.	ISO 179/1eA
	23 °C	22 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 22 kJ/m²	cond.	ISO 179/1eA
	23 °C	23 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 23 kJ/m²	dry	ISO 179/1eA
Impact strength, Charpy unnotched	-30 °C	93 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 93 kJ/m²	cond.	ISO 179/1eU
	-30 °C	96 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 96 kJ/m²	dry	ISO 179/1eU
	23 °C	85 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 85 kJ/m²	dry	ISO 179/1eU
	23 °C	88 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 88 kJ/m²	cond.	ISO 179/1eU
Tensile strength		110 MPa Show Supplier Material materials with Tensile strength of 110 MPa	cond.	ISO 527-1/-2
		122 MPa Show Supplier Material materials with Tensile strength of 122 MPa	dry	ISO 527-1/-2

Thermal

Property	Value	Condition	Testing Standard	Comment
Coefficient of thermal expansion	5e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 5e-05 1/K	dry	ISO 11359-1/-2
Melting point	179 °C Show Supplier Material materials with Melting point of 179 °C	dry	ISO 11357-1/-3	10°C/min
Thermal decomposition in air	224 °C Show Supplier Material materials with Thermal decomposition in air of 224 °C		TGA	1% wt. loss
Thermal decomposition in nitrogen	222 °C Show Supplier Material materials with Thermal decomposition in nitrogen of 222 °C		TGA	1% wt. loss
Vicat softening temperature	165 °C Show Supplier Material materials with Vicat softening temperature of 165 °C		ISO 306	50°C/h 50N

Electrical

Property	Value	Condition	Testing Standard	Frequency
Comparative tracking index	600 V Show Supplier Material materials with Comparative tracking index of 600 V	cond.	IEC 60112
Dielectric constant	4 [-] Show Supplier Material materials with Dielectric constant of 4 [-]	dry	IEC 60250	100Hz
	4 [-] Show Supplier Material materials with Dielectric constant of 4 [-]	dry	IEC 60250	1MHz
Dielectric strength	45 kV/mm Show Supplier Material materials with Dielectric strength of 45 kV/mm	cond.	IEC 60243-1
Dissipation factor	0.0251 [-] Show Supplier Material materials with Dissipation factor of 0.0251 [-]	dry	IEC 60250	1MHz
	0.0752 [-] Show Supplier Material materials with Dissipation factor of 0.0752 [-]	dry	IEC 60250	100Hz
Surface resistivity	1e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq	cond.	IEC 60093
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	cond.	IEC 60093

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Melt volume-flow rate	12 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 12 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Application areas

Connectors,Sports Equipment

Fillers

30% Glass Fiber

Processing methods

Injection Molding:

Melt temperature (°C) ISO 294: 280

Mold temperature (°C) ISO 10724: 60

Injection velocity (mm/s) ISO 294: -

Pressure at hold (MPa) ISO 294: 19

Rilsamid® AZM 30 O TLD

Description

Ashby charts

Applications

Materials by this supplier

Properties