Rilsan® BESNO P40 W6 TL

Alternative and trade names
PA11 FR(30)
Want to keep this datasheet? Save it now in your required format

Description

PA11-P, EFHL, 22-005

Rilsan® BESNO P40 W6 TL resin is a polyamide 11 produced from a renewable source. This grade is plasticized and designed for extrusion. This grade is classified as Halogen Free Flame Retardant (HFFR). The percentage of renewable carbon according to ASTM D6866 (calculated) is 79%.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Bio-based content

79 %

Show Supplier Material materials with Bio-based content of 79 %

Density

1.11 g/cm³

Show Supplier Material materials with Density of 1.11 g/cm³

dry

ISO 1183

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

0.54 GPa

Show Supplier Material materials with Elastic modulus of 0.54 GPa

cond.

ISO 527-1/-2

Elongation

50 %

Show Supplier Material materials with Elongation of 50 %

cond.

ISO 527-1/-2

min. | nominal

Elongation at yield

41 %

Show Supplier Material materials with Elongation at yield of 41 %

cond.

ISO 527-1/-2

Impact strength, Charpy notched

-30 °C

7 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 7 kJ/m²

cond.

ISO 179/1eA

23 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 25 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23 and -30°C

cond.

ISO 179/1eU

Yield strength

38 MPa

Show Supplier Material materials with Yield strength of 38 MPa

cond.

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Melting point

180 °C

Show Supplier Material materials with Melting point of 180 °C

dry

ISO 11357-1/-3

10°C/min

Flammability

At thickness 1.6 mm IEC 60695-11-10: V-2 and yellow card available

Technological properties

Property
Application areas

Tubing and Hoses

Certifications

Yellow Card

Processing methods

Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.