General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Bio-based content | 98 % Show Supplier Material materials with Bio-based content of 98 % | ||
Density | 1.02 g/cm³ Show Supplier Material materials with Density of 1.02 g/cm³ | dry | ISO 1183 |
Water absorption | 1.9 % Show Supplier Material materials with Water absorption of 1.9 % | Sim. to ISO 62 |
Mechanical
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Elastic modulus | 1.3 GPa Show Supplier Material materials with Elastic modulus of 1.3 GPa | cond. | ISO 527-1/-2 | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | cond. | ISO 527-1/-2 | min. | nominal | |
Elongation at yield | 5 % Show Supplier Material materials with Elongation at yield of 5 % | cond. | ISO 527-1/-2 | ||
Hardness, Shore D | 72 [-] Show Supplier Material materials with Hardness, Shore D of 72 [-] | dry | ISO 7619-1 | 15 seconds | |
Impact strength, Charpy notched | -30 °C | 12 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 12 kJ/m² | cond. | ISO 179/1eA | |
23 °C | 11 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m² | cond. | ISO 179/1eA | ||
Impact strength, Charpy unnotched | No Break at 23 and -30°C | cond. | ISO 179/1eU | ||
Puncture energy | -30 °C | 70 J Show Supplier Material materials with Puncture energy of 70 J | cond. | ISO 6603-2 | |
Puncture force | -30 °C | 6000 N Show Supplier Material materials with Puncture force of 6000 N | cond. | ISO 6603-2 | |
Yield strength | 36 MPa Show Supplier Material materials with Yield strength of 36 MPa | cond. | ISO 527-1/-2 |
Thermal
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Coefficient of thermal expansion | 8.5e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8.5e-05 1/K | dry | ISO 11359-1/-2 | |
Melting point | 186 °C Show Supplier Material materials with Melting point of 186 °C | dry | ISO 11357-1/-3 | 10°C/min |
Vicat softening temperature | 160 °C Show Supplier Material materials with Vicat softening temperature of 160 °C | ISO 306 | 50°C/h 50N |
Electrical
Property | Value | Condition | Frequency | Testing Standard |
---|---|---|---|---|
Dielectric constant | 3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | dry | 100Hz | IEC 60250 |
3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | dry | 1MHz | IEC 60250 | |
Dielectric strength | 30 kV/mm Show Supplier Material materials with Dielectric strength of 30 kV/mm | cond. | IEC 60243-1 | |
Dissipation factor | 0.0183 [-] Show Supplier Material materials with Dissipation factor of 0.0183 [-] | dry | 1MHz | IEC 60250 |
0.0308 [-] Show Supplier Material materials with Dissipation factor of 0.0308 [-] | dry | 100Hz | IEC 60250 | |
Surface resistivity | 1e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq | cond. | IEC 60093 | |
Volume resistivity | 1e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm | cond. | IEC 60093 |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melt volume-flow rate | 1 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 1 cm³/10min | dry | ISO 1133 | 235°C/2.16kg |
Technological properties
Property | ||
---|---|---|
Application areas | Main applications: Packaging: This grade is delivered dried in sealed packaging (550 kg rigid containers) ready to be processed. Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services. | |
Processing methods | Injection Molding: Extrusion: |