Rilsan® BZM 30 BLACK TL

Alternative and trade names
PA11-GF30
Want to keep this datasheet? Save it now in your required format

Description

PA11,MHL,18-070,GF30

Rilsan® BZM 30 BLACK TLis a fiberglass reinforced polyamide 11 produced from a renewable source. This black grade is designed for injection molding. The percentage of renewable carbon according to ASTM D6866 (calculated) is 95%.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Bio-based content

95 %

Show Supplier Material materials with Bio-based content of 95 %

Density

1.25 g/cm³

Show Supplier Material materials with Density of 1.25 g/cm³

dry

ISO 1183

Water absorption

1.3 %

Show Supplier Material materials with Water absorption of 1.3 %

Sim. to ISO 62

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

6.9 GPa

Show Supplier Material materials with Elastic modulus of 6.9 GPa

cond.

ISO 527-1/-2

Elongation

6 %

Show Supplier Material materials with Elongation of 6 %

cond.

ISO 527-1/-2

Hardness, Shore D

74 [-]

Show Supplier Material materials with Hardness, Shore D of 74 [-]

dry

ISO 7619-1

15 seconds

Impact strength, Charpy notched

-30 °C

11 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m²

cond.

ISO 179/1eA

23 °C

20 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 20 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

-30 °C

83 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 83 kJ/m²

cond.

ISO 179/1eU

23 °C

74 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 74 kJ/m²

cond.

ISO 179/1eU

Unlock all property charts

Tensile strength

110 MPa

Show Supplier Material materials with Tensile strength of 110 MPa

cond.

ISO 527-1/-2

Thermal

PropertyValueConditionTesting StandardComment

Melting point

189 °C

Show Supplier Material materials with Melting point of 189 °C

dry

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

7 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 7 cm³/10min

dry

ISO 1133

235°C/5kg

Technological properties

Property
Application areas

Connectors

Fillers

30% Glass Fiber

Processing methods

Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 250°C / 270°C / 290°C.
  • Mold temperature : 40 - 90°C
  • Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.