General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Bio-based content | 97 % Show Supplier Material materials with Bio-based content of 97 % | ||
Density | 1.07 g/cm³ Show Supplier Material materials with Density of 1.07 g/cm³ | dry | ISO 1183 |
Mechanical
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Elastic modulus | 1.8 GPa Show Supplier Material materials with Elastic modulus of 1.8 GPa | cond. | ISO 527-1/-2 | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | cond. | ISO 527-1/-2 | min. | nominal | |
Elongation at yield | 7 % Show Supplier Material materials with Elongation at yield of 7 % | cond. | ISO 527-1/-2 | ||
Hardness, Shore D | 71 [-] Show Supplier Material materials with Hardness, Shore D of 71 [-] | dry | ISO 7619-1 | 15 seconds | |
Impact strength, Charpy notched | -30 °C | 12 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 12 kJ/m² | cond. | ISO 179/1eA | |
23 °C | 22 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 22 kJ/m² | cond. | ISO 179/1eA |
Thermal
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melting point | 189 °C Show Supplier Material materials with Melting point of 189 °C | dry | ISO 11357-1/-3 | 10°C/min |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melt volume-flow rate | 20 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 20 cm³/10min | dry | ISO 1133 | 235°C/5kg |
Shrinkage | 0.6 % Show Supplier Material materials with Shrinkage of 0.6 % | dry | ISO 294-4 | |
1 % Show Supplier Material materials with Shrinkage of 1 % | dry | ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Main applications: Packaging: This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed. Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services. | |
Fillers | 8% Glass Fiber | |
Processing methods | Injection Molding: |