Rilsan® HT CMNO

Alternative and trade names
PA*
Want to keep this datasheet? Save it now in your required format

Description

PA11/10T,,M,C16-020 Rilsan® HT CMNO

is a polyphthalamide produced from a renewable source. Percentage of renewable carbon according to ASTM D6866: 65 %.

This material data has been provided by Arkema Technical Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Bio-based content

65 %

Show Supplier Material materials with Bio-based content of 65 %

Density

1.1 g/cm³

Show Supplier Material materials with Density of 1.1 g/cm³

dry

ISO 1183

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

2.4 GPa

Show Supplier Material materials with Elastic modulus of 2.4 GPa

cond.

ISO 527-1/-2

Elongation at yield

4 %

Show Supplier Material materials with Elongation at yield of 4 %

cond.

ISO 527-1/-2

Hardness, Shore D

81 [-]

Show Supplier Material materials with Hardness, Shore D of 81 [-]

dry

ISO 7619-1

15 seconds

Impact strength, Charpy notched

-30 °C

8 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 8 kJ/m²

cond.

ISO 179/1eA

23 °C

6 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 6 kJ/m²

cond.

ISO 179/1eA

Impact strength, Charpy unnotched

-30 °C

59 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 59 kJ/m²

cond.

ISO 179/1eU

23 °C

38 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 38 kJ/m²

cond.

ISO 179/1eU

Unlock all property charts

Thermal

PropertyValueConditionTesting StandardComment

Glass transition temperature

82 °C

Show Supplier Material materials with Glass transition temperature of 82 °C

dry

ISO 11357-1/-2

10°C/min

Melting point

255 °C

Show Supplier Material materials with Melting point of 255 °C

dry

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Melt volume-flow rate

10 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 10 cm³/10min

dry

ISO 1133

255°C/2.16kg

Shrinkage

1.2 %

Show Supplier Material materials with Shrinkage of 1.2 %

dry

ISO 294-4

Transverse

1.3 %

Show Supplier Material materials with Shrinkage of 1.3 %

dry

ISO 294-4

Technological properties

Property
Application areas

Monofilaments

Processing methods

Injection Molding:

  • Typical melt temperature (Min / Recommended / Max) : 270°C / 280°C / 300°C.** **
  • Typical mold temperature : 80 - 110°C.
  • Drying time and temperature (only for bags opened for more than two hours) : 4 - 8 hours at 100 - 110°C.


    Profile Extrusion:

  • Typical melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.
  • Drying time and temperature (only for bags opened for more than two hours) : 8 - 12 hours at 70 °C.