Rilsan® T GREY 7017 BHV RX

Alternative and trade names
PA11
Want to keep this datasheet? Save it now in your required format

Description

Rilsan® 7017 Grey BHV RX FB Fluid Bed Powder

Rilsan® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

This material data has been provided by Arkema High Performance Polymers.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Abrasion resistance, weight loss

15 mg

Show Supplier Material materials with Abrasion resistance, weight loss of 15 mg

ISO 9352, Wheel CS 17, load 1 kg, 1000 cycles

Fluidized density

23.0 °C

0.5 [-]

Show Supplier Material materials with Fluidized density of 0.5 [-]

Median particles size

100 - 130 μm

Show Supplier Material materials with Median particles size of 100 - 130 μm

ISO 13320

Non Tap density

23.0 °C

0.52 g/cm³

Show Supplier Material materials with Non Tap density of 0.52 g/cm³

ISO 1068

Relative density

23.0 °C

1.05 [-]

Show Supplier Material materials with Relative density of 1.05 [-]

ISO 1183

Tap density

23.0 °C

0.62 g/cm³

Show Supplier Material materials with Tap density of 0.62 g/cm³

ISO 1068

Water absorption

23.0 °C

1 %

Show Supplier Material materials with Water absorption of 1 %

max., ISO 62-1, 24h

Mechanical

PropertyTemperatureValueComment

Hardness, Persoz

240 [-]

Show Supplier Material materials with Hardness, Persoz of 240 [-]

ISO 1522

Impact energy, coating

23.0 °C

2 J

Show Supplier Material materials with Impact energy, coating of 2 J

min., ASTM G14

Thermal

PropertyValueComment

Melting point

183 - 188 °C

Show Supplier Material materials with Melting point of 183 - 188 °C

ISO 1218

Electrical

PropertyTemperatureValueComment

Dielectric strength

23.0 °C

30 kV/mm

Show Supplier Material materials with Dielectric strength of 30 kV/mm

ASTM D149, thickness = 350-450mm

Technological properties

Property
Application areas

Main applications:

  • Coating of wire goods and piping components exposed to high weathering or corrosive environments
  • Coating of machinery exposed to high abrasion such as spline shafts
  • Coating of springs for sound reduction
  • Rilsan® fluid bed powders are designed to coat metal substrates via fluidized powder bed dipping. RX grades are designed to be especially suitable for adding thick Coatings to rollers
  • Powder Coatings For General Purpose and Rollers

  • Color

    Grey

    Covering efficiency

    0.36 kg/m²

    Covering efficiency, thickness

    300 µm

    Other

    Additional info:

  • Smooth texture with a glossy appearance
  • Good adhesion after over 2000 hours of salt spray testing (ISO 9227)
  • Only 8% fine particles < 40 µm (ISO 13320)
  • Only 10% coarse particles > 254 µm (ISO 13320)
  • 5 year shelf life from date of manufacture
  • Available in 20 kg bags