Rilsan® T YELLOW 7379 MAC

Alternative and trade names
PA11, Approximate RAL number: 1020
Want to keep this datasheet? Save it now in your required format


Rilsan® 7379 Yellow MAC Fluid Bed Powder

Rilsan® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts



PropertyValueTesting StandardComment


1.19 g/cm³

Show Supplier Material materials with Density of 1.19 g/cm³

ISO 1183

relative density

Fluidized density

0.5 [-]

Show Supplier Material materials with Fluidized density of 0.5 [-]

Median particles size

100 - 130 μm

Show Supplier Material materials with Median particles size of 100 - 130 μm

ISO 13320

Non Tap density

0.57 g/cm³

Show Supplier Material materials with Non Tap density of 0.57 g/cm³

ISO 1068

Tap density

0.69 g/cm³

Show Supplier Material materials with Tap density of 0.69 g/cm³

ISO 1068

Water absorption

1 %

Show Supplier Material materials with Water absorption of 1 %

ISO 62-1

max. | for 24h


PropertyValueTesting StandardComment

Hardness, Persoz

280 [-]

Show Supplier Material materials with Hardness, Persoz of 280 [-]

ISO 1522

Impact energy, coating

2 J

Show Supplier Material materials with Impact energy, coating of 2 J




PropertyValueConditionTesting Standard

Melting point

183 - 188 °C

Show Supplier Material materials with Melting point of 183 - 188 °C


ISO 1218


PropertyValueTesting StandardComment

Dielectric strength

30 kV/mm

Show Supplier Material materials with Dielectric strength of 30 kV/mm


thickness = 350-450mm

Technological properties

Application areas

Powder Coatings - Automotive & Transportation,Powder Coatings - Exterior Applications,Powder Coatings - General Purpose,Powder Coatings - Wire Goods



Covering efficiency

0.35 kg/m²

Covering efficiency, thickness

300 µm