Rilsan® TMVO

Alternative and trade names
PA1010
Want to keep this datasheet? Save it now in your required format

Description

Rilsan® TMVO resin

  • Rilsan® POLYAMIDE 1010 (PA1010) Rilsan® TMVO resin is a dried polyamide 1010 resin neat produced from a renewable source. This natural grade is a designed for compounding, filament extrusion and some injection molding applications. Percentage of renewable carbon according to ASTM D6866: 99%.

  • This material data has been provided by Arkema High Performance Polymers.

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyTemperatureValueComment

    Bio-based content

    99 %

    Show Supplier Material materials with Bio-based content of 99 %

    ASTM D6866

    Density

    23.0 °C

    1.04 g/cm³

    Show Supplier Material materials with Density of 1.04 g/cm³

    ISO 1183

    Mechanical

    PropertyTemperatureValueComment

    Elastic modulus

    23.0 °C

    1.6 GPa

    Show Supplier Material materials with Elastic modulus of 1.6 GPa

    ISO 527-1/-2

    Impact strength, Charpy notched

    -30.0 °C

    11 kJ/m²

    Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m²

    23.0 °C

    16 kJ/m²

    Show Supplier Material materials with Impact strength, Charpy notched of 16 kJ/m²

    Impact strength, Charpy unnotched

    No break @ 23,-30°C, ISO 179/1eU

    Thermal

    PropertyValueComment

    Heat deflection temperature, 1.80 MPa

    50 °C

    Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 50 °C

    ISO 75-1/-2

    Melting point

    202 °C

    Show Supplier Material materials with Melting point of 202 °C

    ISO 11357-1/-3, 10°C/min

    Technological properties

    Property
    Application areas

    Monofilaments