G.AL® 7075GF, Al rolled plate

Want to keep this datasheet? Save it now in your required format


In certain applications, the use of higher-strength cast plates is not sufficient; high-strength rolled plates must be used. However, the problem with rolled plates is the wide toleration of thickness and flatness, which results in extremely complex processing. Precision rolled plate G.AL® 7075GF from alloy EN AW 7075 (AlZn5.5MgCu), finely milled on both sides and covered with protective foil, provides users with a semi-finished product which drastically reduces the time required for machining.

Equivalent Materials

This material data has been provided by Gleich Aluminum.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





23.0 °C

2.8 g/cm³

Show Supplier Material materials with Density of 2.8 g/cm³

Surface roughness

0.4 μm

Show Supplier Material materials with Surface roughness of 0.4 μm




1520 mm

Show Supplier Material materials with Width of 1520 mm


Standard stock sizes: 1520mm x 3020mm and 12-40mm in thickness



Elastic modulus

23.0 °C

71 GPa

Show Supplier Material materials with Elastic modulus of 71 GPa

Elongation A50

23.0 °C

5 - 8 %

Show Supplier Material materials with Elongation A50 of 5 - 8 %

Hardness, HBW

23.0 °C

158 - 161 [-]

Show Supplier Material materials with Hardness, HBW of 158 - 161 [-]

Test method: 2.5/62.5

Tensile strength

23.0 °C

530 - 540 MPa

Show Supplier Material materials with Tensile strength of 530 - 540 MPa

Yield strength Rp0.2

23.0 °C

460 - 470 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 460 - 470 MPa



Coefficient of thermal expansion

23.0 °C

2.34E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 2.34E-5 1/K

Specific heat capacity

23.0 °C

862 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 862 J/(kg·K)

Thermal conductivity

23.0 °C

130 - 160 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 130 - 160 W/(m·K)



Electrical conductivity

23.0 °C

1.90E+7 - 2.30E+7 S/m

Show Supplier Material materials with Electrical conductivity of 1.90E+7 - 2.30E+7 S/m

Technological properties


Heat treatable alloy

Processing history

Temper: T651